02.06.2013 Views

Caution - TA Triumph-Adler

Caution - TA Triumph-Adler

Caution - TA Triumph-Adler

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Preparation for Usage<br />

Loading Originals in the Document Processor (option)<br />

2-18<br />

Use the optional document processor to automatically read multi-page originals one page at a time.<br />

Also automatically turn over and read both sides of two-sided originals.<br />

The document processor supports the following types of originals.<br />

Item Specifications<br />

Weight 1-sided original: 45 g/m2 - 160 g/m2 2-sided original: 50 g/m2 - 120 g/m2 Size Maximum 11 × 17"/A3 - Minimum 5 1/2 ×81/2"/A5R<br />

Capacity Standard paper (80 g/m2 , 11 × 8 1/2"/A4 or smaller), color paper (11 × 8 1/2"/A4<br />

or smaller), recycled paper (11 × 8 1/2"/A4 or smaller): 100 sheets or less<br />

(Auto Selection Mode: 30 sheets)<br />

Standard paper (80 g/m2 , 8 1/2 × 14"/B4 or larger), color paper (8 1/2 ×14"/B4<br />

or larger), recycled paper (8 1/2 × 14"/B4 or larger): 70 sheets or less<br />

Art paper: 1 sheet<br />

Precautions on Types of Originals for Document Processor<br />

Do not use the document processor for the following types of originals. Additionally, if originals have<br />

punched holes or perforations, load them with the holes or perforations away from the leading edge.<br />

• Transparent films such as OHP transparencies<br />

• Delicate originals such as carbon paper, heavily crumpled paper, or vinyl sheets<br />

• Irregularly shaped (non-rectangular) originals, wet originals, or originals containing adhesive<br />

tape or glue<br />

• Remove clips or staples and straighten any curls, wrinkles, or creases before loading. Failure to<br />

do so may cause the originals to jam.<br />

• Originals with cut-out sections or with very slippery surfaces<br />

• Originals with correction fluid that has not dried<br />

• Straighten the folds of bent originals before loading. Failure to do so may cause the originals to<br />

jam.<br />

Document Processor Part Names<br />

1 Original table<br />

2 Original width guides<br />

3 Original eject table<br />

4 Document processor cover<br />

5 Original loaded indicator<br />

6 Cleaning cloth compartment<br />

NOTE: Original loaded indicator shows the state of the originals.<br />

When upper indicator is lit green: The original is set.<br />

When upper indicator blinks green: Reset the original.<br />

When lower indicator blinks red: The original is jammed. Refer to Clearing Paper Jams on<br />

page 6-15.<br />

How to Load Originals<br />

Follow these steps to load originals in the document processor.<br />

5<br />

4 2 1 3 6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!