Caution - TA Triumph-Adler

More documents

Recommendations

Info

Preparation for Usage Placing Originals Loading Originals on the Platen 2-16 This section explains how to place an original for copying or scanning. Open the original platen and place the original on the platen. You may also place non-sheet originals such as books or magazines. 1 Open the original platen. NOTE: If the optional document processor has been installed, open the document processor. Before opening the document processor, be sure that there are no originals left on the original tray or on the original eject table. Originals left on the original table or on the original eject table may fall off the machine when the document processor is opened. For originals over 4 cm thick, leave the document processor open during copying. 2 Place the original. Place the side to be copied face down and starting from the back left corner, align flush against the original size indicator plates. Original size indicator plates (Inch models)
(Metric models) 3 Close the original platen. Preparation for Usage IMPOR<strong>TA</strong>NT: Do not push the original platen or document processor forcefully when you close it. Excessive pressure may crack the platen glass. Shadows may appear around the edges and in the middle of copies of open-faced originals such as books. <strong>Caution</strong>: Do not leave the document processor open as there is a danger of personal injury. 2-17
Page 1 and 2: Instruction Handbook Basic DCC 2625
Page 3 and 4: Taking Advantage of Advanced Functi
Page 5 and 6: Hue Adjust Adjust the color (hue) o
Page 7 and 8: Scanning Functionality Full-color S
Page 9 and 10: Legal and Safety Information Please
Page 11 and 12: Regarding Tradenames • PRESCRIBE
Page 13 and 14: Safety Conventions in This Guide Pl
Page 15 and 16: Installation Precautions Environmen
Page 17 and 18: If anything harmful (paper clips, w
Page 19 and 20: Laser Safety (Europe) Laser radiati
Page 21 and 22: xix
Page 23 and 24: xxi
Page 25 and 26: About this Operation Guide This Ope
Page 27 and 28: Conventions in This Guide The follo
Page 29 and 30: Contents Legal and Safety Informati
Page 31 and 32: 1 Part Names This chapter identifie
Page 33 and 34: 22 23 31 21 Output Tray 22 Left Cov
Page 35 and 36: Touch Panel Copy Screen Displayed b
Page 37 and 38: 2 Preparation for Usage This chapte
Page 39 and 40: 1 Pull the cassette out toward you
Page 41 and 42: NOTE: Before loading the paper, be
Page 43 and 44: Setting Paper Type and Size for the
Page 45 and 46: 2 Press [Machine Default]. Preparat
Page 47 and 48: 3 Press [Auto Detection]. 4 Select
Page 49 and 50: Custom Size Preparation for Usage S
Page 51: 6 Press [Close]. The display return
Page 55 and 56: Preparation for Usage IMPORTANT: Be
Page 57 and 58: Connecting Cables Preparation for U
Page 59 and 60: 5 Press [] or [] to select TCP/IP a
Page 61 and 62: Installing the Printer Driver Prepa
Page 63 and 64: It is safe to proceed if the Hardwa
Page 65 and 66: 16 Confirm settings and click the F
Page 67 and 68: Preparing the Scanner Connecting to
Page 69 and 70: 2 Press [Scanner Default]. Preparat
Page 71 and 72: Modifying Common Address Book Regis
Page 73 and 74: 6 Destination Registration Select t
Page 75 and 76: 8 Press [+] and [-] to set the time
Page 77 and 78: 5 Select Install a desktop mode and
Page 79 and 80: 6 Choose a folder and click the OK
Page 81 and 82: Preparation for Usage NOTE: For Add
Page 83 and 84: 3 Basic Operation This chapter expl
Page 85 and 86: 5 Confirm that [APS] is selected. I
Page 87 and 88: Selecting Image Quality Choose the
Page 89 and 90: Reducing/Enlarging Auto Zoom Adjust
Page 91 and 92: Preset Zoom Reduces or enlarges at
Page 93 and 94: Duplex Mode Use Duplex mode to crea
Page 95 and 96: For [1 sided 2 sided] ([1-sided 2
Page 97 and 98: 2 Press [2 sided/Separation] ([2-si
Page 99 and 100: Interrupt Copy Interrupt copying is
Page 101 and 102: Canceling a Print Job Follow the st
Page 103 and 104:
Basic Operation NOTE: If the scanne
Page 105 and 106:
14 Confirm settings, place the orig
Page 107 and 108:
6 Press [Common] ([Common book]) or
Page 109 and 110:
Scan an Image Using TWAIN Basic Ope
Page 111 and 112:
Database Connection Setup 1 Press t
Page 113 and 114:
9 Changed items are identified with
Page 115 and 116:
3 Select a destination (user name).
Page 117 and 118:
Low-Power Mode Auto Low-Power Mode
Page 119 and 120:
4 Optional Equipment This chapter i
Page 121 and 122:
Serial Interface Network Interface
Page 123 and 124:
Document Finisher The document fini
Page 125 and 126:
Hard Disk Additional Memory Securit
Page 127 and 128:
5 Maintenance This chapter describe
Page 129 and 130:
Slit Glass Separator When black str
Page 131 and 132:
Toner Container and Waste Toner Box
Page 133 and 134:
6 Place the used toner container in
Page 135 and 136:
17 Install the new waste toner box.
Page 137 and 138:
6 Troubleshooting This chapter expl
Page 139 and 140:
Troubleshooting Symptom Checkpoints
Page 141 and 142:
Check paper size. Is the specified
Page 143 and 144:
Troubleshooting Error Messages Chec
Page 145 and 146:
Troubleshooting Error Messages Chec
Page 147 and 148:
The file was not saved. Check the d
Page 149 and 150:
Scanner Error Codes Below is a list
Page 151 and 152:
Clearing Paper Jams Jam Location In
Page 153 and 154:
4 Remove any jammed paper. If the p
Page 155 and 156:
Cassette 3, 4 (option) Follow the s
Page 157 and 158:
5 Open feed guide B1. 6 Remove any
Page 159 and 160:
Left Cover 1 Interior 15 Remove any
Page 161 and 162:
Fixing Unit 2 Remove any jammed pap
Page 163 and 164:
Document Processor (option) Follow
Page 165 and 166:
Appendix This section explains the
Page 167 and 168:
Copying Performance Copying Speed (
Page 169 and 170:
Document Processor (option) Paper F
Page 171 and 172:
Job Separator (option) Environmenta
Page 173 and 174:
Index Numerics 3000 sheet document
Page 175 and 176:
Size xxvi, 2-7, 2-10 Type 2-8, 2-15
Page 177 and 178:
For best results and machine perfor
show all

Caution - TA Triumph-Adler

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?