Caution - TA Triumph-Adler
Caution - TA Triumph-Adler
Caution - TA Triumph-Adler
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Troubleshooting<br />
Error Messages Checkpoints Corrective Actions Reference<br />
Page<br />
File not found Press GO. — A file error has occurred. Press<br />
[GO].<br />
Warning image adapt. — Printing not possible at currently set<br />
resolution due to insufficient<br />
memory. Add memory to the printer<br />
or change the print resolution.<br />
Print overrun Press GO. — Overrun has occurred due to<br />
insufficient memory.<br />
Press the Printer key to switch to<br />
printer mode.<br />
Press [GO] to continue printing.<br />
Press [Cancel] to cancel printing.<br />
If resume time has been configured<br />
for Auto Continue, printing resumes<br />
automatically after the set time has<br />
elapsed. After displaying this<br />
message, Page Protect mode is<br />
automatically set to [On].<br />
Memory overflow Press GO. — The current print job cannot be<br />
processed due to insufficient free<br />
memory.<br />
Interface is occupied. Is the selected interface currently in<br />
use?<br />
Press the Printer key to switch to<br />
printer mode.<br />
Press [GO] to continue printing. The<br />
remaining pages will be printed up to<br />
the final processed data.<br />
Press [Cancel] to cancel printing.<br />
If RAM Disk is enabled, decrease<br />
the RAM disk size. Additional printer<br />
memory is recommended if this error<br />
frequently occurs. For additional<br />
printer memory, contact your Service<br />
Representative or Authorized<br />
Service Center. If resume time has<br />
been configured for Auto Continue,<br />
printing resumes automatically after<br />
the set time has elapsed.<br />
—<br />
—<br />
—<br />
—<br />
Try the operation again later. —<br />
Opt. ROM error Press GO. — An option ROM read error has<br />
occurred. Press the Printer key and<br />
press [GO]. The error is cleared.<br />
Check the waste punch box.<br />
(Check Punch Hole box.)<br />
Is the optional 3000 sheet document<br />
feeder waste punch box securely<br />
fastened?<br />
Refer to the optional 3000 sheet<br />
document feeder Operation Guide to<br />
securely fasten the waste punch<br />
box.<br />
—<br />
—<br />
6-9