Caution - TA Triumph-Adler
Caution - TA Triumph-Adler
Caution - TA Triumph-Adler
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Troubleshooting<br />
Solving Malfunctions<br />
6-2<br />
The table below provides general guidelines for problem solving.<br />
If a problem occurs with your machine, check the checkpoints and perform procedures indicated on<br />
the following pages. If the problem persists, contact your Service Representative.<br />
Symptom Checkpoints Corrective Actions Reference<br />
Page<br />
The operation panel does<br />
not respond when the<br />
machine is turned on ( |<br />
position).<br />
Pressing the Start key<br />
does not produce copies.<br />
The original size is not<br />
detected properly.<br />
Is the machine plugged in? Plug the power cord into an AC outlet. —<br />
Is a message displayed on the touch<br />
panel?<br />
Determine the appropriate response to<br />
the message and take action<br />
accordingly.<br />
Are the originals loaded correctly? When placing originals on the platen,<br />
place them face-down and align them<br />
with the original size indicator plates.<br />
Is the machine installed beneath<br />
fluorescent lights?<br />
Place originals face-up in the optional<br />
document processor.<br />
Do not install this machine beneath<br />
fluorescent lights.<br />
Blank sheets are output. Are the originals loaded correctly? When placing originals on the platen,<br />
place them face-down and align them<br />
with the original size indicator plates.<br />
Is the machine installed beneath<br />
fluorescent lights?<br />
Printing is too light. Is the machine set to Manual Exposure<br />
mode?<br />
Is the toner distributed evenly within the<br />
toner container?<br />
Is there a message indicating the<br />
addition of toner?<br />
Place originals face-up in the optional<br />
document processor.<br />
Do not install this machine beneath<br />
fluorescent lights.<br />
Use the exposure adjustment key to set<br />
the correct exposure level.<br />
Shake the toner container up and down<br />
approximately 10 times.<br />
page 6-4<br />
page 2-16<br />
page 2-18<br />
—<br />
page 2-16<br />
page 2-18<br />
—<br />
page 3-6<br />
page 5-5<br />
Replace the toner container. page 5-5<br />
Is the copy paper damp? Replace the copy paper with new paper. page 2-2<br />
Printing is too dark. Is the machine set to Manual Exposure<br />
mode?<br />
Copies have a moire<br />
pattern (dots grouped<br />
together in patterns and<br />
not aligned uniformly).<br />
Use the exposure adjustment key to set<br />
the correct exposure level.<br />
page 3-6<br />
Is the original a printed photograph? Set the image quality to [Print]. page 3-5<br />
Copies are not clear. Did you choose appropriate image<br />
quality for the original?<br />
Select an appropriate Image Quality<br />
mode.<br />
page 3-5<br />
Is the copy paper damp? Replace the copy paper with new paper. page 2-2<br />
Is special color copy paper being used? Use special color copy paper. —<br />
Copies are dirty. Are the original platen or platen dirty? Clean the original platen or platen glass. page 5-2<br />
Printer output is fuzzy. Is the copy paper damp? Replace the copy paper with new paper. page 2-2<br />
Is special color copy paper being used? Use special color copy paper. —
Change language