Caution - TA Triumph-Adler

3 Select a destination (user name). Either
press the number key or use the
numeric keys to enter the user number
and press [Enter].
Basic Operation
NOTE: If the scanner default setting for Selec. of senders (users) is set to [On], user number 001
will automatically be selected.
If a password was entered when the user was registered, the password input screen is displayed.
Input the password and press [Enter].
4 Press [Address Book].
5 Press [] or [], select the desired
destination FTP server and press [Enter]
([Add dest.]). Log in to the destination
FTP Server.
When a destination is selected, an ⌧ is
displayed next to it in the Select column
to the right of the Address column.
6 If destination FTP server is selected
where in Skip Auth. info Input (Modifying
Common Address Book on page 2-35)
has been set to [Off], at the following
step enter the usename and password
and press [Close].
Username entry
1 Press [Change #] for the username.
2 Input the username.
3 Press [End].
Password entry
1 Press [Change #] for the password.
2 Enter the password.
3 Press [End].
7 Press [Close].
name.
0-9
Place the original and select destination.
Scan to FTP-Sending
Destination
GHI
O PQR
X YZ
Ready to scan. ( Full-Color )
Address
FTP01
Address
Book
User Name & Password
On
Destination :ftp001
User name
Password
Select:
Delete
0.
Register Prgrm
Stop
User number
(with #key)
Enter
Original
11×8½"
08/08
Cont. TX to
Auto
Top Edge
Select
Orig.Size
Orig. Set
Direction
Auto size
200dpi
Select
Scanning
Send Size Resolution
Basic Quality
Up
Down
Close
Address
Properties
Enter
Back
Change #
Change #
3-33