Caution - TA Triumph-Adler
Caution - TA Triumph-Adler
Caution - TA Triumph-Adler
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Basic Operation<br />
3-26<br />
11 If the original has been loaded with Top<br />
edge set at the rear, select [Top Edge]<br />
([Back Edge]). If the original has been<br />
set to the left, press [Left Top Edge]<br />
([Left top corner]). Press [Close] to save<br />
the setting, or press [Back] to leave<br />
settings as they are and return to the<br />
screen shown in Step 8.<br />
NOTE: The original may not be scanned correctly if original set direction is not correctly configured.<br />
Be sure to confirm the original set direction when configuring the scanner.<br />
12 Confirm settings, place the original, and<br />
press the Start key.<br />
Scanning of the original begins.<br />
If continuous scan is enabled, proceed<br />
to Step 13. If continuous sending is<br />
enabled, proceed to Step 14.<br />
13 If [Batch Scanning] is set to [On] from<br />
[Edit] from the scanner settings screen,<br />
after scanning is complete, a screen<br />
prompt appears asking whether to<br />
continue scanning or to finish.<br />
To continue scanning, place the next<br />
original, select scanner settings as<br />
necessary and press the Start key.<br />
When done, press [Scanning finished].<br />
14 If [Continuous TX] is enabled from the<br />
scanner settings screen, after a<br />
transmission is complete, the scanner<br />
settings screen is displayed with the<br />
same settings used in the previous<br />
transmission.<br />
To continue, place the next original,<br />
select scanner settings as necessary<br />
and press the Start key.<br />
to scan.<br />
riginal and select destination.<br />
To end the operation, press [Cancel] ([Job cancel]).<br />
tion<br />
( Full-Color )<br />
"Check direction of original" shown at<br />
right side of display. Follow the steps.<br />
If setting mode is wrong, incorrect send<br />
will result.<br />
Now scanning originals.<br />
Orig. Page<br />
11×8½"<br />
1 sided<br />
Top Edge<br />
User name: UserA<br />
Scan to PC<br />
Original Send<br />
11×8½" 8½×11"<br />
08/08/’05 14:00<br />
NOTE: If Permit File Overwrite is checked in Scanner File Utility, files with already existing names<br />
will be overwritten. Exercise caution when inputting file names during Batch Scanning mode.<br />
.3<br />
riginal(s).<br />
riginals and press start key.<br />
nning finished" key to finish scanning.<br />
Step .2<br />
Top Edge<br />
Orig. Set<br />
Direction<br />
200dpi<br />
Scanning<br />
Resolution<br />
Quality<br />
Auto<br />
File Name<br />
Input<br />
JPEG<br />
File Type<br />
Edit<br />
Place the original and select destination.<br />
Scan to PC-Continuous TX<br />
Destination<br />
Address<br />
Book<br />
Send<br />
8½×11"<br />
SCAN0004_nnn.jpg<br />
Original<br />
Back<br />
Select Original Image<br />
Direction.<br />
Top Edge<br />
.1 Page<br />
SCAN0005_nnn.jpg<br />
Ready to scan. ( Full-Color )<br />
Save at<br />
User PC<br />
Delete<br />
Register Prgrm<br />
Close<br />
Left Top<br />
Edge<br />
08/08/’05 14:00<br />
Cancel<br />
Scanning<br />
finished<br />
08/08<br />
Original<br />
11×8½"<br />
08/08<br />
Single Scan<br />
Auto<br />
Top Edge<br />
Select<br />
Orig.Size<br />
Orig. Set<br />
Direction<br />
Auto size<br />
200dpi<br />
Select<br />
Send Size<br />
Scanning<br />
Resolution<br />
Basic Quality
Change language