Instruction Handbook - TA Triumph-Adler
Instruction Handbook - TA Triumph-Adler Instruction Handbook - TA Triumph-Adler
8 Return the developer unit to its position, aligning the guides at both ends with the slots in the printer. Then, close the front cover and top cover. 4-8 Maintenance
Prolonged Non-Use and Moving of the Printer Prolonged Non-use If you ever leave the printer unused for a long period of time, remove the power cord from the wall outlet. We recommend you consult with your dealer about the additional actions you should take to avoid possible damage that may occur when the printer is used next time. Moving the Printer When you move the printer: • Move it gently. • Keep it as level as possible to avoid spilling toner inside the printer. • Be sure to consult a service technician before attempting longdistance transportation of the printer. WARNING If you ship the printer, remove and pack the developer unit and drum unit in a plastic bag and ship them separately from the printer. Maintenance 4-9
- Page 20 and 21: xviii About the Operation Guide Thi
- Page 23 and 24: 1 Machine Parts This chapter identi
- Page 25 and 26: 10 11 12 13 Components at the Rear
- Page 27 and 28: Indicators Indicator Status Meaning
- Page 29 and 30: 2 Loading Paper This chapter explai
- Page 31 and 32: Paper cassette 356mm (14 inches) 14
- Page 33 and 34: Basis weight Basis weight is the we
- Page 35 and 36: Special Paper The following types o
- Page 37 and 38: Thick Paper Fan the stack of paper
- Page 39 and 40: Preparing the Paper After removing
- Page 41 and 42: Note Do not load paper above the tr
- Page 43 and 44: 1 2 Correct Incorrect Correct Corre
- Page 45 and 46: 3 Connecting and Printing This chap
- Page 47 and 48: Installing the Printer Driver Ensur
- Page 49 and 50: Custom Mode Use Custom Mode if you
- Page 51 and 52: 9 Click the plus symbol (+) to add
- Page 53 and 54: Printing This section explains the
- Page 55 and 56: Screen Overview The screen overview
- Page 57 and 58: Appearance Tab The Appearance tab i
- Page 59 and 60: Status Tab The Status tab displays
- Page 61 and 62: Others Tab The Others tab enables y
- Page 63 and 64: 4 Maintenance This chapter explains
- Page 65 and 66: Replacing the Toner Container This
- Page 67 and 68: 6 Turn the lock lever to the lock p
- Page 69: 4 Place the drum unit flat on a cle
- Page 73 and 74: 5 Troubleshooting This chapter expl
- Page 75 and 76: Print Quality Problems Printed Resu
- Page 77 and 78: Understanding Indicators The indica
- Page 79 and 80: Indicator Meaning [Ready] indicator
- Page 81 and 82: Indicator Meaning Remedy A paper ja
- Page 83 and 84: Cleaning Paper Jams If paper jams i
- Page 85 and 86: Paper Cassette/Paper Feeder 1 Pull
- Page 87 and 88: Inside the Printer 1 Pull the paper
- Page 89 and 90: Rear Cover 1 Open the rear cover an
- Page 91 and 92: 6 Option This chapter explains the
- Page 93 and 94: Expansion Memory Modules To expand
- Page 95 and 96: 7 The memory module is secured to t
- Page 97 and 98: Network Interface Card The network
- Page 99 and 100: 4 Insert the CF Card. 5 Secure it w
- Page 101 and 102: 7 Appendix This section lists the f
- Page 103 and 104: Item Operating Environment Temperat
- Page 105 and 106: Index A Adhesive label ............
- Page 107 and 108: Toner indicator operation panel ...
- Page 110: UTAX GmbH, Ohechaussee 235, 22848 N
Prolonged Non-Use and Moving of the Printer<br />
Prolonged Non-use<br />
If you ever leave the printer unused for a long period of time, remove the<br />
power cord from the wall outlet.<br />
We recommend you consult with your dealer about the additional actions<br />
you should take to avoid possible damage that may occur when the<br />
printer is used next time.<br />
Moving the Printer<br />
When you move the printer:<br />
• Move it gently.<br />
• Keep it as level as possible to avoid spilling toner inside the printer.<br />
• Be sure to consult a service technician before attempting<br />
longdistance transportation of the printer.<br />
WARNING If you ship the printer, remove and pack the<br />
developer unit and drum unit in a plastic bag and ship them<br />
separately from the printer.<br />
Maintenance 4-9