Instruction Handbook - TA Triumph-Adler
Instruction Handbook - TA Triumph-Adler Instruction Handbook - TA Triumph-Adler
Developer Unit Drum Unit Cleaning the Printer To avoid print quality problems, the interior of the printer must be cleaned with every toner container replacement. 1 Open the top cover and front cover. 2 Lift the developer unit together with the toner container out of the printer. 3 Remove the drum unit from the printer by holding the green levers with both hands. Note The drum unit is sensitive to light. Never expose the drum unit to light for more than five minutes. 4-6 Maintenance
4 Place the drum unit flat on a clean, level surface. IMPORTANT Do not place the drum unit on end. 5 Use a clean, lint free cloth to clean dust and dirt away from the metal registration roller. IMPORTANT Take care not to touch the transfer roller (black) during cleaning. 6 On the drum unit, slide the charger cleaner (green) back and forth 2 or 3 times to clean the charger wire, then return it to its original position (CLEANER HOME POSITION ). IMPORTANT Remove the fixing tape on the charger cleaner before cleaning for the first time. After cleaning, make sure you restore the charger cleaner to its home position. 7 When cleaning is complete, return the drum unit to the original position. Maintenance 4-7
- Page 18 and 19: xvi Precautions for Use Cautions wh
- Page 20 and 21: xviii About the Operation Guide Thi
- Page 23 and 24: 1 Machine Parts This chapter identi
- Page 25 and 26: 10 11 12 13 Components at the Rear
- Page 27 and 28: Indicators Indicator Status Meaning
- Page 29 and 30: 2 Loading Paper This chapter explai
- Page 31 and 32: Paper cassette 356mm (14 inches) 14
- Page 33 and 34: Basis weight Basis weight is the we
- Page 35 and 36: Special Paper The following types o
- Page 37 and 38: Thick Paper Fan the stack of paper
- Page 39 and 40: Preparing the Paper After removing
- Page 41 and 42: Note Do not load paper above the tr
- Page 43 and 44: 1 2 Correct Incorrect Correct Corre
- Page 45 and 46: 3 Connecting and Printing This chap
- Page 47 and 48: Installing the Printer Driver Ensur
- Page 49 and 50: Custom Mode Use Custom Mode if you
- Page 51 and 52: 9 Click the plus symbol (+) to add
- Page 53 and 54: Printing This section explains the
- Page 55 and 56: Screen Overview The screen overview
- Page 57 and 58: Appearance Tab The Appearance tab i
- Page 59 and 60: Status Tab The Status tab displays
- Page 61 and 62: Others Tab The Others tab enables y
- Page 63 and 64: 4 Maintenance This chapter explains
- Page 65 and 66: Replacing the Toner Container This
- Page 67: 6 Turn the lock lever to the lock p
- Page 71 and 72: Prolonged Non-Use and Moving of the
- Page 73 and 74: 5 Troubleshooting This chapter expl
- Page 75 and 76: Print Quality Problems Printed Resu
- Page 77 and 78: Understanding Indicators The indica
- Page 79 and 80: Indicator Meaning [Ready] indicator
- Page 81 and 82: Indicator Meaning Remedy A paper ja
- Page 83 and 84: Cleaning Paper Jams If paper jams i
- Page 85 and 86: Paper Cassette/Paper Feeder 1 Pull
- Page 87 and 88: Inside the Printer 1 Pull the paper
- Page 89 and 90: Rear Cover 1 Open the rear cover an
- Page 91 and 92: 6 Option This chapter explains the
- Page 93 and 94: Expansion Memory Modules To expand
- Page 95 and 96: 7 The memory module is secured to t
- Page 97 and 98: Network Interface Card The network
- Page 99 and 100: 4 Insert the CF Card. 5 Secure it w
- Page 101 and 102: 7 Appendix This section lists the f
- Page 103 and 104: Item Operating Environment Temperat
- Page 105 and 106: Index A Adhesive label ............
- Page 107 and 108: Toner indicator operation panel ...
- Page 110: UTAX GmbH, Ohechaussee 235, 22848 N
4 Place the drum unit flat on a clean, level surface.<br />
IMPOR<strong>TA</strong>NT Do not place the drum unit on end.<br />
5 Use a clean, lint free cloth to clean dust and dirt away from the metal<br />
registration roller.<br />
IMPOR<strong>TA</strong>NT Take care not to touch the transfer roller (black)<br />
during cleaning.<br />
6 On the drum unit, slide the charger cleaner (green) back and forth 2<br />
or 3 times to clean the charger wire, then return it to its original<br />
position (CLEANER HOME POSITION ).<br />
IMPOR<strong>TA</strong>NT Remove the fixing tape on the charger cleaner<br />
before cleaning for the first time.<br />
After cleaning, make sure you restore the charger cleaner to its<br />
home position.<br />
7 When cleaning is complete, return the drum unit to the original<br />
position.<br />
Maintenance 4-7