Instruction Handbook - TA Triumph-Adler
Instruction Handbook - TA Triumph-Adler
Instruction Handbook - TA Triumph-Adler
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration Tool<br />
The Configuration Tool allows you to check and/or change the settings<br />
for printers not included in the KX Driver.<br />
The Configuration Tool can be used for printers connected to the PC via<br />
a USB cable.<br />
Note The contents of the Properties dialog box will vary<br />
depending on the installed optional devices, and whether the<br />
device is connected by a network interface or a local interface.<br />
Accessing the Configuration Tool<br />
Follow these steps to display the Configuration Tool on the desktop.<br />
Note To configure the settings of the Configuration Tool, run the<br />
Status Monitor on your computer at first.<br />
1 Right-click the Status Monitor icon in the Windows taskbar.<br />
2 Select Configure the Printing System from the menu. The<br />
Configuration Tool window appears.<br />
Note When the printer is connected with the network cables,<br />
Embedded Web Server starts instead of the Configuration Tool.<br />
Exiting the Configuration Tool<br />
Use either of the methods listed below to exit the Configuration Tool.<br />
• Exit using the Close button:<br />
Click in the top-right corner of the Configuration Tool window.<br />
• Exit using the OK or Cancel button:<br />
Clicking OK exits the Configuration Tool after applying the modified<br />
printer settings. Clicking Cancel exits the Configuration Tool without<br />
applying the modified printer settings.<br />
3-14 Connecting and Printing