Instruction Handbook - TA Triumph-Adler
Instruction Handbook - TA Triumph-Adler Instruction Handbook - TA Triumph-Adler
Loading Paper into MP (Multi-Purpose)Tray This machine can load up to 50 sheets of 11 × 8 1/2" or A4 paper (80 g/m²) into the MP Tray. 1 Pull the MP tray towards you until it stops. IMPORTANT When pulling the cassette out of the printer, ensure it is supported and does not fall out. 2 Adjust the position of the paper guides on the MP tray. Standard paper sizes are marked on the MP tray. For standard paper sizes, slide the paper guides to the corresponding mark. 3 Pull out the subtray. 4 Align the paper with the paper guides and insert as far as it will go. Note Do not load more paper than exceeds the tab of the MP tray. 2-14 Loading Paper
1 2 Correct Incorrect Correct Correct Incorrect When loading envelope, place with the envelope flap closed and keep the printing side face-up. Insert envelope against the guide with the flap on the front or left side until they stop. 5 Specify the paper size and type for MP tray using Configuration Tool. For more information, refer to Configuration Tool on page 3-14. Paper Stopper Note If the paper is considerably curled in one direction, for example, if the paper is already printed on one side, try to roll the paper in the opposite direction to counteract the curl. Printed sheets will then come out flat. Open the paper stopper shown in the figure. Loading Paper 2-15
- Page 1 and 2: Instruction Handbook LP 4130 | 4135
- Page 3: Contents 1 Machine Parts ..........
- Page 6 and 7: iv Legal Information Notice on Soft
- Page 8 and 9: vi 1. the equivalent of U.S. $25,00
- Page 10 and 11: viii Compliance and Conformity This
- Page 12 and 13: x Caution Labels Laser inside the p
- Page 14 and 15: xii Safety Instructions Regarding t
- Page 16 and 17: xiv 11-13/16" (300mm) Installation
- Page 18 and 19: xvi Precautions for Use Cautions wh
- Page 20 and 21: xviii About the Operation Guide Thi
- Page 23 and 24: 1 Machine Parts This chapter identi
- Page 25 and 26: 10 11 12 13 Components at the Rear
- Page 27 and 28: Indicators Indicator Status Meaning
- Page 29 and 30: 2 Loading Paper This chapter explai
- Page 31 and 32: Paper cassette 356mm (14 inches) 14
- Page 33 and 34: Basis weight Basis weight is the we
- Page 35 and 36: Special Paper The following types o
- Page 37 and 38: Thick Paper Fan the stack of paper
- Page 39 and 40: Preparing the Paper After removing
- Page 41: Note Do not load paper above the tr
- Page 45 and 46: 3 Connecting and Printing This chap
- Page 47 and 48: Installing the Printer Driver Ensur
- Page 49 and 50: Custom Mode Use Custom Mode if you
- Page 51 and 52: 9 Click the plus symbol (+) to add
- Page 53 and 54: Printing This section explains the
- Page 55 and 56: Screen Overview The screen overview
- Page 57 and 58: Appearance Tab The Appearance tab i
- Page 59 and 60: Status Tab The Status tab displays
- Page 61 and 62: Others Tab The Others tab enables y
- Page 63 and 64: 4 Maintenance This chapter explains
- Page 65 and 66: Replacing the Toner Container This
- Page 67 and 68: 6 Turn the lock lever to the lock p
- Page 69 and 70: 4 Place the drum unit flat on a cle
- Page 71 and 72: Prolonged Non-Use and Moving of the
- Page 73 and 74: 5 Troubleshooting This chapter expl
- Page 75 and 76: Print Quality Problems Printed Resu
- Page 77 and 78: Understanding Indicators The indica
- Page 79 and 80: Indicator Meaning [Ready] indicator
- Page 81 and 82: Indicator Meaning Remedy A paper ja
- Page 83 and 84: Cleaning Paper Jams If paper jams i
- Page 85 and 86: Paper Cassette/Paper Feeder 1 Pull
- Page 87 and 88: Inside the Printer 1 Pull the paper
- Page 89 and 90: Rear Cover 1 Open the rear cover an
- Page 91 and 92: 6 Option This chapter explains the
Loading Paper into MP (Multi-Purpose)Tray<br />
This machine can load up to 50 sheets of 11 × 8 1/2" or A4 paper<br />
(80 g/m²) into the MP Tray.<br />
1 Pull the MP tray towards you until it stops.<br />
IMPOR<strong>TA</strong>NT When pulling the cassette out of the printer, ensure<br />
it is supported and does not fall out.<br />
2 Adjust the position of the paper guides on the MP tray. Standard<br />
paper sizes are marked on the MP tray. For standard paper sizes,<br />
slide the paper guides to the corresponding mark.<br />
3 Pull out the subtray.<br />
4 Align the paper with the paper guides and insert as far as it will go.<br />
Note Do not load more paper than exceeds the tab of the MP<br />
tray.<br />
2-14 Loading Paper