Instruction Handbook - Triumph-Adler

3 Press [Booklet].
4 Select binding orientation for Original and Finished.
Copy Functions
If the message Cannot copy with these settings. Modify settings according to the original and
finishing is displayed, verify that you are selecting the correct original orientation (shown at the right
of the touch panel) and the correct settings for the original and finished copies.
5 If the optional 3000 sheet document finisher and folding unit are installed, [Saddle stitch] ([Centre
Staple]) is displayed. To set bind&fold, press [Saddle stitch] ([Centre Staple]).
Press [Bind & Fold] and press [Close].
Up to 16 sheets (64 pages) can be
processed with bind&fold.
6 To insert a cover page, press [Stitching Front Cvr] ([Stitching Front cov.]).
Press [On] and press [Close].
7 Place the original and press the Start key.
NOTE: When using the platen, be sure to place the originals in page order.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and
press the Start key.
If all original pages have been scanned, press [Scanning finished]. Copying begins.
Off
2 sided mode.
Booklet
Booklet
Book
Booklet
Saddle Stitch
No cover
Bind &
Fold
Original
1 sided
2-sided
Left/Right
2-sided
Top/Bottom
( )
Full-Color
Paper Size
11×1
100%
Shortcut
Back
Finished Stitching
Off
Open from Stitching
left Front cvr
Open from
right
Open from
top
Off
Saddle
Stitch
2 sided mode. ( Full-Color )
Stitching Front Cvr
Off
On
2 sided mode. ( )
Select Original I
Direction.
Top Edge
Back
Paper Size
11×1
100%
Paper Size
Full-Color 11×1
100%
Back
Automatically adds covers in book
binding mode using paper (color o
thick) fed from a different cassette
Load the paper for covers in the
specified cassette.
1-27