Manuel d'utilisation - MTR
Manuel d'utilisation - MTR Manuel d'utilisation - MTR
GB INSTRUCTIONS FOR USE Adjustments for EXTENSION / FLEXION The KINETEC Centura provides motion from 20° to 180° of flexion. During this motion the elbow flexion settings are fixed. Parts needed • Chair • Abduction or flexion splint • Hand control Assembling the parts Loosen the knob (1) and slide the motor support (2) to the right or the left. Plug in the hand control. Use the color code to assemble the forearmsplint (6). Tighten the knob (7). Assemble the abduction motor (3) and tighten the screw (4). Plug in the motor. Position arm splint (8). The assembly is secure when you hear a ‘click’ Page 28 Use the color code to assemble the forearm support (red for right, blue for left). The assembly is secure when you hear a ‘click’. The KINETEC Centura is shown assembled for left shoulder mobilization.
INSTRUCTIONS FOR USE Patient set up Make sure the straps are clean. Put the unit in the position that is the most comfortable for the patient. Position the patient in the chair in a comfortable position and supporting the affected arm. Adjusting the shoulder joint axis c – Vertical adjustment: • Loosen the 2 knobs (1). • With the handle (2), adjust the height of the entire mechanism. • Tighten the 2 knobs (1). d – Side to side adjustment: • Loosen the knob (3) • Slide the entire mechanism • Tighten the knob (3). e – Shoulder depth adjustment: • Loosen the knob (4). • Slide the entire mechanism. • Tighten the knob (4). f – Scapula plan choice • Loosen the knob (5) • Rotate the arm support • Tighten the knob (5). • Adjust the arm rest. Starting the unit • Choice of flexion/extension: Slide the arm supports toward the patient and put the arm in the supports. Secure pads. - Press and adjust your parameters (see page 10). - Or select a program (see page 12). Page 29 Adjust the lengths: a - arm b - forearm. GB
- Page 1 and 2: • Manuel d’utilisation • User
- Page 3 and 4: SUMMARY Page 1 Page DESCRIPTION 2-6
- Page 5 and 6: DESCRIPTION ELECTRICAL CONNECTION K
- Page 7 and 8: 30 32 20 31 DESCRIPTION 21 15 22 25
- Page 9 and 10: ASSEMBLY & TRANSPORT Base assembly
- Page 11 and 12: USE OF THE HAND CONTROL Reset time
- Page 13 and 14: USE OF THE HAND CONTROL How to set
- Page 15 and 16: USE OF THE HAND CONTROL Reading the
- Page 17 and 18: USE OF THE HAND CONTROL How to modi
- Page 19 and 20: USE OF THE HAND CONTROL How to defi
- Page 21 and 22: INSTRUCTIONS FOR USE How to use the
- Page 23 and 24: INSTRUCTIONS FOR USE Patient set up
- Page 25 and 26: INSTRUCTIONS FOR USE Patient set up
- Page 27 and 28: INSTRUCTIONS FOR USE Patient set up
- Page 29: INSTRUCTIONS FOR USE Patient set up
- Page 33 and 34: INSTRUCTIONS FOR USE Patient set up
- Page 35 and 36: PRODUCT INFORMATION MAINTENANCE Aft
- Page 37 and 38: Page 35 GB
INSTRUCTIONS FOR USE<br />
Patient set up<br />
Make sure the straps are clean.<br />
Put the unit in the position that is the most comfortable for the patient.<br />
Position the patient in the chair in a<br />
comfortable position and<br />
supporting the affected arm.<br />
Adjusting the shoulder joint axis<br />
c – Vertical adjustment:<br />
• Loosen the 2 knobs (1).<br />
• With the handle (2),<br />
adjust the height of the entire mechanism.<br />
• Tighten the 2 knobs (1).<br />
d – Side to side adjustment:<br />
• Loosen the knob (3)<br />
• Slide the entire mechanism<br />
• Tighten the knob (3).<br />
e – Shoulder depth adjustment:<br />
• Loosen the knob (4).<br />
• Slide the entire mechanism.<br />
• Tighten the knob (4).<br />
f – Scapula plan choice<br />
• Loosen the knob (5)<br />
• Rotate the arm support<br />
• Tighten the knob (5).<br />
• Adjust the arm rest.<br />
Starting the unit<br />
• Choice of flexion/extension:<br />
Slide the arm supports toward<br />
the patient and put the arm in the<br />
supports.<br />
Secure pads.<br />
- Press and adjust your parameters (see page 10).<br />
- Or select a program (see page 12).<br />
Page 29<br />
Adjust the lengths:<br />
a - arm<br />
b - forearm.<br />
GB
Change language