Manuel d'utilisation - MTR

More documents

Recommendations

Info

GB USE OF THE HAND CONTROL • During the session The BY-PASS MODE is a way to record the pain threshold of a patient during a session. Beginning The unit is running To select the BY-PASS MODE To set the new pain level when reached, immediately press To select the BY-PASS mode for lower limits To set the new pain level when reached, immediately press Continue the session with the new movement limits. Keys to press continuous press continuous press Page 18 Display Remarks FLEX/EXT 25 RUN 30 150 FLEX/EXT 25 BYPASS 160 150 FLEX/EXT 25 BYPASS 160 160 FLEX/EXT 25 BYPASS 20 160 FLEX/EXT 20 BYPASS 20 160 FLEX/EXT 20 BYPASS 50 160 The angle display changes with current movement. Check if the locking switch is in the following position: or The unit exceeds the recorded upper limit. The new upper value limit of the movement is recorded. The unit is moving to the lower limit of the movement. The new lower value limit of the movement is recorded. The angle display changes with current movement. Specific rules for synchronized movement: • You can only change the upper limit of the movement through the manual mode and only beyond the synchronization point. Comments: • The values shown in the ‘Display’ column are examples. They actually depend on the stored programs.
INSTRUCTIONS FOR USE How to use the pads KINETEC Centura is delivered with 7 straps: Part number to order the complete set: 4650001397 All these straps are used the same way (see pictures). Do not tighten the straps too much. Page 19 • 4 straps on the abduction combined with the rotation or horizontal abduction splint. • 3 straps on the abduction or flexion splint. To meet optimal hygiene, clean the straps after each patient. GB
Page 1 and 2: • Manuel d’utilisation • User
Page 3 and 4: SUMMARY Page 1 Page DESCRIPTION 2-6
Page 5 and 6: DESCRIPTION ELECTRICAL CONNECTION K
Page 7 and 8: 30 32 20 31 DESCRIPTION 21 15 22 25
Page 9 and 10: ASSEMBLY & TRANSPORT Base assembly
Page 11 and 12: USE OF THE HAND CONTROL Reset time
Page 13 and 14: USE OF THE HAND CONTROL How to set
Page 15 and 16: USE OF THE HAND CONTROL Reading the
Page 17 and 18: USE OF THE HAND CONTROL How to modi
Page 19: USE OF THE HAND CONTROL How to defi
Page 23 and 24: INSTRUCTIONS FOR USE Patient set up
Page 35 and 36: PRODUCT INFORMATION MAINTENANCE Aft
Page 37 and 38: Page 35 GB

Manuel d'utilisation - MTR

Create successful ePaper yourself

Delete template?

Save as template?