You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USE OF THE HAND CONTROL<br />
Reading the values of a program: example SPEED<br />
Beginning<br />
To stop the unit<br />
To access the program<br />
mode<br />
To change the program if<br />
necessary<br />
To read the speed value<br />
After 15 seconds or after<br />
pressing on another key<br />
To exit and validate the<br />
selected program<br />
Start the unit<br />
Comments:<br />
Keys to<br />
press<br />
or<br />
Page 13<br />
Display Remarks<br />
ROTATION<br />
0 STOP 0 90<br />
PROGRAM 1<br />
0 ROTATION 30<br />
PROGRAM 3<br />
0 ROTATION 90<br />
PROGRAM 3<br />
SPEED 5<br />
PROGRAM 3<br />
0 ROTATION 90<br />
ROTATION<br />
0 STOP 0 90<br />
ROTATION<br />
0 RUN 0 90<br />
Check if the locking switch<br />
is in the following position:<br />
or<br />
The program number<br />
blinks.<br />
The new program number<br />
blinks.<br />
Displaying the speed<br />
value.<br />
The current parameters<br />
have been recorded in<br />
program 3.<br />
The value change at the<br />
speed of the movement.<br />
• The values showed in the ‘Display’ column are examples. They actually depend on<br />
the stored programs.<br />
• The current movement parameters can be changed while using that program but<br />
no data will be stored in the original program. See the programming mode (p 14) to<br />
modify programs.<br />
GB