Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
page 16<br />
-- Settings --<br />
Service code |%<br />
reset |<br />
>Summer/Winter < |<br />
-- Summer/Winter --<br />
>Winter mode <<br />
-- Summer/Winter --<br />
>Summer mode <<br />
19. Menu Informations<br />
-- Main menue --<br />
Settings<br />
>informations <<br />
Default setting<br />
-- informations --<br />
>Sensors < |<br />
actuators |<br />
System/SWversion |%<br />
-- informations --<br />
>Sensors < |<br />
actuators |<br />
System/SWversion |%<br />
-- Sensors --<br />
>Door cntact ON< |<br />
grate contact ON |<br />
release ON |%<br />
-- Sensoren -t<br />
Flame 38 |%<br />
t Flue gas 26 |<br />
>t Plug-in 24< |%<br />
-- Sensors -t<br />
Flue gas 26 |%<br />
t Plug-in 24 |<br />
>t Boiler 29< |<br />
fig. 40<br />
fig. 41<br />
fig. 42<br />
fig. 43<br />
fig. 44<br />
fig. 45<br />
fig. 46<br />
fig. 47<br />
fig. 48<br />
Summer/Winter (only for appliances with central heating insert)<br />
To reduce heat output in summer, the appliance can be changed from winter to<br />
summer mode. This setting limits the upwards adjustment range of the pellet<br />
burner.<br />
• Boiler set-point temperature WINTER 75°C<br />
• Boiler set-point temperature SUMMER 65°C<br />
Select the menu SUMMER/WINTER by pressing or and press the<br />
OK button once (figure 38).<br />
The setting can be changed by pressing the buttons or (figure 40/41).<br />
Press button three times to return to the top level of the menu.<br />
To enter the menu Information from the main menu, select the menu Information<br />
by pressing the button or and press the OK once (figure 42).<br />
Sensors Passive appliance components such as sensors, …<br />
Actuators Active appliance components such as motors, blowers, …<br />
Appliance / SW Display of the pre-set appliance type and of the installed<br />
Version<br />
software version.<br />
Operating hours Display of the total amount of operating hours as well as<br />
how many operating hours are left until the next maintenance<br />
of the appliance is due.<br />
Sensors<br />
Select the menu Sensors in the menu Information by pressing the button<br />
or and press the OK once (figure 44)<br />
Paging through the menu items is possible by pressing the button or<br />
(figure 45-47).<br />
ON /OFF (OFF = door open)<br />
ON /OFF (OFF = grate open)<br />
ON /OFF (OFF = no external command)<br />
Current flame temperature<br />
Current exhaust gas temperature<br />
Current discharge chute temperature<br />
Current boiler temperature – (only for appliances with central heating insert)<br />
Press three times to return to the top level of the menu.
Change language