user manual - Lohberger Heiz

More documents

Recommendations

Info

page 14 -- Settings -time/date | >automatic mode < | Heating period |% -- automatic mode -- >auto OFF < -- automatic mode -- >auto ON < -- Settings -time/Date | automatic mode | >Heating period < |% -- Heating period -- >MO< We Fr Su tu tH Sa aLL --Heating period MO-- >t1 10:30 - 13:00 < t2 13:30 - 17:00 fig. 26 fig. 27 fig. 28 fig. 29 fig. 30 fig. 31 Adjust by pressing the buttons or Press OK button once, the set value is stored and the display Year flashes Press OK button once, the set value is stored Press 3 times to return to the top level of the menu. Automatic mode The automatic operation determines whether the appliance is operated <strong>manual</strong>ly (standard setting OFF) or whether the internal clock is used for switching the appliance on /off. Select the menu Automatic operation in the menu SETTINGS by pressing or (Fig. 25) Press OK button once. The setting can be changed by pressing the buttons or geändert werden (Fig. 26/27). Press the button 3 times to return to the top level of the menu. Should the appliance be switched on or off by means of an external command, for example by means of a room thermostat, a buffer thermostat etc., the AUTOMATIC MODE can be changed to OFF or ON. However, when switching AUTOMATIC MODE to ON, an external command will only be taken into account within the pre-set heating times! Heating times Here you can select two heating times each for each individual weekday (MO, TU, WE …). If the same heating times shall apply for the whole week, two heating times each can be selected with ALL. CAUTION: The setting ALL will overwrite all settings of the individual weekdays! Select the menu Heating period in the menu Settings by pressing the buttons or and press the OK once (figure 28). Select weekday by pressing the buttons (figure 29). or and press OK once Select heating time (T1 /T2) by pressing the buttons or (figure 30) Press OK button once, the display Turn-on time/hour flashes. Adjust value by pressing the buttons or . Press the OK button once, the set value is stored, the display Turn-on time/minute flashes Adjust value by pressing the buttons or . Press OK button once, the set value is stored, the display Turn-off time/hour flashes. --> For settings see turn-on time. Press four times to return to the top level of the menu.
-- Settings -automatic mode | Heating period | >Keylock < |% -- Keylock -- >Keylock OFF < -- Keylock -- >Keylock ON < -- Settings -- Heating period | Keylock | >Servicecode < |% -- Servicecode -- >Servicecode **** < -- Servicecode -- code wrong -- Settings -- Keylock | Service code | >reset < |% -- reset -- reset with OK fig. 32 fig. 33 fig. 34 fig. 35 fig. 36 fig. 37 fig. 38 fig. 39 Key lock (function) To use the key lock in the top level of the menu, the key lock function must be activated. If the keylock function is switched on, the key lock will be automatically activated after a power failure. Select the menu Keylock in the menu Settings by pressing the buttons or and press OK button once (figure 31). The key lock function can be activated /deactivated by pressing the buttons or (figure 32/33). Press button 3 times to return to the top level of the menu. Now the key lock can be activated or deactivated in the top level of the menu by simultaneous pressing of the buttons and . Service code Reset To confirm cleaning works or maintenance works that have been performed on the appliance, a service code is to be entered. As a consequence the relevant internal service hour meter will be reset. • Cleaning works are necessary after 250 operating hours and this will be indicated in the top level of the menu by the display “APPLIANCE CLEAN- ING”, confirmation with cleaning code 1234 • Maintenance works are necessary after 2000 operating hours and this will be shown in the top level of the menu by “APPLIANCE MAINTENANCE”, a confirmation by a service technician is required. Select the menu Servicecode in the menu Settings by pressing the buttons or and press OK button once (figure 34). Press OK button once, the first digit flashes. Adjust number by pressing the buttons or (figure 35). Press OK button once, the next digit flashes. After entering the last digit, press the OK button once, when the correct service code has been entered, the message “cLeaNiNg cONF.” or “MaiNteNaNce cONF.” appears in the text box. Press the OK button once, the service hour meter for the maintenance interval will be reset (resetting not visible!). If an incorrect service code is entered, the message cODe WrONg appears in the text box (figure 36). Press OK button once, repeat the steps for the entry of the service code and enter the correct service code. Press button twice to return to the top level of the menu In case of a reset all customer specific settings such as heating times etc. will be reset to default setting! Select the menu RESET in the menu SETTINGS by pressing the buttons or and press OK button once (figure 37). Press OK button once, a reset will be carried out (figure 38). The display returns to the menu Settings. Press the button twice to return to the top level of the menu. page 15
Page 1 and 2: Edition July 2010 USER MANUAL WITH
Page 3 and 4: When installing and starting-up the
Page 5 and 6: 2. Technical data 1 Cover 2 Control
Page 7 and 8: 5. Fuels Wood storage Water content
Page 9 and 10: 9. Heating connection Flue pipe con
Page 11 and 12: 13. Scope of supply A C1 J2 H1 J 8
Page 13: 18. Main menu -- Main menu -- >Sett
Page 17 and 18: -- informations -- Sensors | >actua
Page 19 and 20: 22. Heating operation with firewood
Page 21 and 22: 26. Maintenance / Cleaning Exhaust
Page 23 and 24: StB activateD Overheating, max. per
Page 25 and 26: 31. Terminal connection diagram Ear
Page 27 and 28: 34. After-sales service /Ordering s

user manual - Lohberger Heiz

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?