Cmax - STERIS Surgical Technologies

Orthopedic
Total Hip
With the patient in Normal Orientation, the low-profile base and
radiolucent top provide superior imaging capabilities.*
• Anesthesia Arm Board with 2" (51 mm) Pad (BF803)
• Multi-posture Arm Board with 2" (51 mm) Pad (BF432)
• Clark Socket (pair) (BF083) or
Multi Accessory Clamp (pair) (BF43)
• Foot Extension with Side Rail Locks (BF2)
• Conductive Restraint Strap (BF45)
• AQUAGEL Lateral Positioner (BF484)
• AQUAGEL Supine Headrest (BF466; large)
• AQUAGEL Contoured Leg Protector (BF478)
Shoulder Chair
The Shoulder Chair Accessory provides selective access to both
anterior and posterior aspects of a patient’s shoulder and upper
arm without the need to move the patient during surgery, and
provide the patient with adequate torso and head support. This
procedure positions the patient in Reverse Orientation.*
• Cmax Shoulder Chair (BF594)
• Multi-posture Arm Board with 2" (51 mm) Pad (BF432)
• Clark Socket (pair) (BF083) or
Multi Accessory Clamp (pair) (BF43)
• Conductive Restraint Strap (BF45)
• Foot Extension with Side Rail Locks (BF2)
• Head Restraint Straps, box of 12 (BF099)
• AQUAGEL Contoured Sacral Protector (BF474)
Orthopedic Extension
When this mobile accessory package is applied, the Cmax surgical
table has the positioning flexibility of an orthopedic surgical table
for procedures such as hip pinning, intramedullary nailing of the
femur, and tibia and fibula surgery.*
• Cmax Orthopedic Accessory Package (BF572)
• Multi-posture Arm Board with 2" (51 mm) pad (BF432)
• Anesthesia Arm Board with 2" (51 mm) Pad (BF803)
* NOTE: Some protective patient padding was removed for image clarity.
X-ray tops (not shown) are available for all procedures.