2 - agrotarna.lt

The effective technology
Variant I:
Knife shoe
The unit is suitable for light types of soils
with low content of plant residues. The closing
plate prevents its blocking during reverse
movements. It properly crosses obstacles, such
as stones and/or bats.
Monsun MC
Variant III:
Disc shoe X
The X seeding units are designed to conventional
or minimizing sowing for mulching in heaviest
soils with high content of plant residues. The
mutual displacement and turning of disks
enables seeding during dry climatic conditions
as well as under increased soil humidity. The
housing of discs prevents blocking of seeds,
sticking of soil to the disks and their subsequent
stopping.
Variant II:
Disc shoe
The unit is suitable for heavier soils. Its benefi t is
good permeability and it also manages higher
content of plant residues.
Pneumatic Seeding System
Pneumatic sowing machines are used
not only for seeding of common cereals
(wheat, rye, barley, oats) but also for
legumes and oleaginous crops (pea, beans,
bean pod, corn, soya-beans, oilseed rape
etc.) and even grasses from 1 mm to 10 mm.
ORIGINAL ACCORD
Central batch is the core of the system. It
enables maximum precise batch of the seeds
within the range of 2–380 kg per hectare. The
central fully closed seeding roll accurately
measures the seed and feeds it into an injector
channel where it is mixed with air fl ow from
fan; then it continues through the diff usion
tube into the distributor and further through
the seed-ducts into the individual seeding
units. There are only minimum residual seeds
in the hopper and they may be discharged by
means of auxiliary discharging fl ap.
17