Mechanical Joints, Terminations & Connectors for ... - TransNet
Mechanical Joints, Terminations & Connectors for ... - TransNet
Mechanical Joints, Terminations & Connectors for ... - TransNet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• A range of connectors <strong>for</strong><br />
incorporating one or two service<br />
take off connections onto LV<br />
mains to mains connections<br />
• These connectors are composed<br />
of an Aluminium alloy body with<br />
Aluminium alloy bolts<br />
• Suitable <strong>for</strong> AL conductors<br />
or Cu conductors when resin<br />
encapsulated<br />
• Designed to meet the<br />
requirements of BS4579 Part<br />
1 and Part 3 and engineering<br />
recommendation C79<br />
• Can be installed under live<br />
working conditions (following<br />
suitable procedures)<br />
• These connectors are intended<br />
<strong>for</strong> “live” jointing of service<br />
conductors on to LV mains cables<br />
of various types<br />
• Insulation piercing connection<br />
Removal of conductor insulation is<br />
not required<br />
• Up to 300mm 2 main and up to<br />
2x35mm 2 service conductors<br />
• Fully shrouded connector body<br />
• Insulated drive mechanism<br />
detaches at set torque when<br />
installation is complete<br />
• Suitable <strong>for</strong> AL or Cu conductors<br />
• Designed and tested to IEC 61238-1<br />
• Can be installed under live<br />
working conditions (following<br />
suitable procedures)<br />
15