Mechanical Joints, Terminations & Connectors for ... - TransNet

More documents

Recommendations

Info

UBRxxSBS/SBD Universal Branch Connector with single and double service takeoffs up to 1kV Dimensions (mm) Part Number No. Service Takeoffs L H W Application Type Size Range Tap Off UBR95-SBS Single 52 44 49 13mm Socket 35-95mm2 6-35mm2 UBR185-SBS Single 66 52 66 19mm Socket 35-185mm2 6-35mm2 UBR300-SBS Single 66 59 77 19mm Socket 70-300mm2 6-35mm2 UBR95-SBD Double 64 44 49 13mm Socket 35-95mm2 6-35mm2 UBR185-SBD Double 78 52 66 19mm Socket 35-185mm2 6-35mm2 UBR300-SBD Double 78 59 77 19mm Socket 70-300mm2 6-35mm2 MSIP Insulated IPC Connector for Mains to Service Connections Dimensions (mm) Part Number No. Service Takeoffs L H W Application Type Size Range MSIP185 Insulation Piercing Connector with 2 x 83 60 48 19mm Socket Main 50-185mm2 Service Takeoff’s 3mm Allen Service MSIP300 Insulation Piercing Connector with 2 x 83 60 55 19mm Socket Main 185-300mm2 Service Takeoff’s 3mm Allen Service 14
• A range of connectors for incorporating one or two service take off connections onto LV mains to mains connections • These connectors are composed of an Aluminium alloy body with Aluminium alloy bolts • Suitable for AL conductors or Cu conductors when resin encapsulated • Designed to meet the requirements of BS4579 Part 1 and Part 3 and engineering recommendation C79 • Can be installed under live working conditions (following suitable procedures) • These connectors are intended for “live” jointing of service conductors on to LV mains cables of various types • Insulation piercing connection Removal of conductor insulation is not required • Up to 300mm 2 main and up to 2x35mm 2 service conductors • Fully shrouded connector body • Insulated drive mechanism detaches at set torque when installation is complete • Suitable for AL or Cu conductors • Designed and tested to IEC 61238-1 • Can be installed under live working conditions (following suitable procedures) 15
Page 1 and 2: Energy Division Mechanical Joints,
Page 3 and 4: Contents 11kV Inline Joints, Transi
Page 5 and 6: • Full range of LV joints availab
Page 7 and 8: • Full range of LV terminations a
Page 9 and 10: • Suitable for Cu or AL (solid or
Page 11 and 12: • Suitable for stranded or solid
Page 13: • A range of connectors for incor
Page 17 and 18: Brass gauze is recommended for use
Page 19 and 20: • Can be designed to network spec
Page 21 and 22: • Complete with mechanical connec
Page 23 and 24: • Eliminates the need for two joi
Page 27 and 28: Packaged kit containing: • Termin
Page 29 and 30: • Heat shrinkable bushing boots
Page 33 and 34: • Eliminates the need for two joi
Page 41 and 42: • These connectors are intended a
Page 43 and 44: These lugs are designed for use on
Page 45 and 46: These connectors are designed for u
Page 47 and 48: These connectors are designed for u
Page 49 and 50: • Mechanical repair sleeves are u

Mechanical Joints, Terminations & Connectors for ... - TransNet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?