Synopsys FPGA Licensing Guide
Synopsys FPGA Licensing Guide
Synopsys FPGA Licensing Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installing Linux Security Keys Chapter 2: Installation<br />
The USB daemon starts automatically whenever the server is rebooted.<br />
6. If the daemon does not start, use one of the rpms included in the flexid<br />
subdirectory as outlined below:<br />
– Mount the USB files with the following command:<br />
mount -t usbfs none /proc/bus/usb<br />
– Change to the install_directory/linux/flexid subdirectory and type the<br />
appropriate command for the rpm:<br />
Red Hat rpm -i HDD_RPM_RedHat_i386/aksusbd-redhat-1.8.1-3.i386.rpm<br />
SuSE rpm -i HDD_RPM_SuSE_i386/aksusbd-suse-1.8.1-3.i386.rpm<br />
– Log off as root.<br />
– To verify that the daemon is up and running, use the following lmutil<br />
command option:<br />
% install_directory/linux/lmutil lmhostid -flexid<br />
If the FLEXid key is reported as shown in the following line, the USB<br />
daemon is running.<br />
The FLEXlm host ID of this machine is "FLEXID=9-xxxxxxxx"<br />
<strong>Synopsys</strong> <strong>FPGA</strong> <strong>Licensing</strong> User <strong>Guide</strong>, August 2008 2-23
Change language