Synopsys FPGA Licensing Guide
Synopsys FPGA Licensing Guide
Synopsys FPGA Licensing Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 2: Installation Installing the Synplify DSP Software<br />
2. Start MATLAB.<br />
3. To add Synplify DSP to the MATLAB environment, type the following<br />
commands at the command line or add them to a startup script file like<br />
startup.m. If you use a startup script, save it in the working directory.<br />
Use the commands that match the MATLAB version you are using.<br />
MATLAB<br />
R2006b<br />
MATLAB<br />
R2007A<br />
MATLAB<br />
R2007B<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP')<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP/MATLAB7/linux')<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP/demos')<br />
dspstartup<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP')<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP/MATLAB74/linux')<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP/demos')<br />
dspstartup<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP')<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP/MATLAB75/linux')<br />
addpath('/mathworks/toolbox/Synplicity/<br />
SynDSP/demos')<br />
dspstartup<br />
is the absolute path of the directory where you<br />
installed the Synplify DSP software. Note the following:<br />
– Directory order is important, so specify the commands in the order<br />
shown. If you do not specify them in this order, some Synplify DSP<br />
blocks are not initialized and will not simulate.<br />
– The dspstartup command is optional but often gives better simulation<br />
performance. It is a Simulink function that sets the simulation engine<br />
to an optimal configuration for discrete-time DSP systems.<br />
LO<br />
2-10 <strong>Synopsys</strong> <strong>FPGA</strong> <strong>Licensing</strong> User <strong>Guide</strong>, August 2008
Change language