Annual report 2009 - Siempelkamp

p g
Side member press for KLT Automobile & Tubular
Products Ltd.
In November 2009 KLT Automobile & Tubular Products Ltd. commissioned
us with the construction and delivery of a side member
press which will operate with a press force of 5,000 t (5,512 US
tons). The Indian fl agship company within the KLT Group uses
this press to produce longitudinal chassis beams for trucks which,
in turn, will be used to build chassis. As a top supplier, KLT Automobile
& Tubular Products Ltd. trusts in state-of-the-art technology.
Here, Siempelkamp supports its customer with top-notch machinery.
Side member press
Plate forming presses: leading manufacturer thanks to modern concepts
Due to our custom solutions as well as innovative and modern technologies, we
are still the leading manufacturer of plate forming presses.
Our scope of supply includes special hydraulic presses which produce, for example,
longitudinal chassis beams, axle brackets and cap parts with a press force of up to
50 MN.
To achieve high precision, these Siempelkamp presses are also available as
8-column presses with two sliding tables and a double tool carrier. Our dishing
Plate bending and dishing press for Bharat Heavy
Electricals Ltd. (BHEL)
An 8,000 t (8,818 US tons) plate bending and dishing press for
our Indian customer BHEL was in progress during 2009. After the
press components have been delivered, the installation will be
completed in 2010. The Indian company will manufacture large
pressure vessels for power plants on the Siempelkamp press.
Upper beam BHEL – welded construction