QuickFly®

M SERIES PRODUCT
Product Compatibility
MILO/MILO 120
Kit Contents
(PN 40.132.039.01)
(1) MCF-MILO caster frame
(4) 3/8" x 1.5" red button quick release pins
(4) lanyard assemblies
(PN 40.132.039.02)
includes HDPE bumpers
Product Compatibility
M2D MILO
M2D-Sub MTK-2D
Kit Contents
(PN 40.112.050.01)
(1) MG-2D grid assembly
(6) leveling feet
(4) .5" x 2.5" quick release pins
MTB-2D/M
(2) each MG-2D CamLinks, front links,
downtilt links, adjustable links
Product Compatibility
M2D M3D
M2D-Sub M3D-Sub
Kit Contents
(PN 40.112.058.01)
(2) MTK-2D transition links (shown)
(4) .5" x 2.5" quick release pins
MCF-MILO Caster Frame
This heavy-duty transport frame is easy to attach to a
MILO standard or MILO 120 expanded coverage high-power
curvilinear loudspeaker. The frame is built to take the weight
of up to 24 MILO loudspeakers (or equivalent weight of
any combination of MILO, MILO 120 and the MILO 120-I
insert) during rigging and tear down. For safety reasons, we
recommend that a maximum of four cabinets be stacked on the
frame during transit. The frame is also available with 2 by 5inch
HDPE bumpers installed on all four sides, adding a 1-inch
space between stacks of loudspeakers when packed.
MG-2D Multipurpose Grid
The MG-2D multipurpose grid allows M2D compact curvilinear
array loudspeakers and M2D-Sub compact subwoofers to be
flown or ground stacked. The MG-2D also provides a transition
from the bottom of an M3D line array (MTK-2D required)
loudspeaker/M3D-Sub directional subwoofer or MILO highpower
curvilinear array to an M2D/M2D-Sub array (MTB-2D/M
required). Up to 16 M2Ds (or a combination of M2Ds/M2D-Subs
of comparable weight) may be flown from single or multiple
rigging points of appropriate rating, with a safety factor of 7:1.
MTK-2D Transition Kit
The MG-2D multipurpose grid requires the MTK-2D transition kit
to suspend M2D compact curvilinear array loudspeakers and/or
M2D-Sub compact subwoofers under an array of M3D line array
loudspeakers and/or M3D-Sub directional subwoofers. The
MTK-2D provides the required adjustable connecting bars and
pins to hang an MG-2D grid beneath an M3D/M3D-Sub array.