QuickFly®

MVE-MILO Vertical Extension Bars
For use with the MILO high-power curvilinear array loudspeaker
in applications where the required splay angle is greater than
the 5° afforded by MILO’s rear AlignaLinks. They are most useful
when reflections from a specific area – such as a balcony in
a theatre or arena – must be minimized. The MVE-MILO
extension bars replace the front triangular AlignaLinks on the
cabinet where the extended angle is required. The splay angle
can be increased by an additional 3°, 6° or 9°. This effectively
provides up to 12° splay angle.
PBF-MILO Pull-Back Frame
When acute array angles are desired, the PBF-MILO pull-back
frame can be fitted to the bottom of the lowest MILO standard
or MILO 120 expanded coverage high-power curvilinear
loudspeaker in an array. The PBF-MILO provides a pair of
attachment points for a standard shackle linked to a dedicated
lift motor. (MTB-2D/M transition bar kit required.)
MTB-2D/M Transition Bar Kit
The MTB-2D/M transition bar kit facilitates connection of an
MG-2D multipurpose grid underneath a MILO standard or MILO
120 expanded coverage high-power curvilinear loudspeaker to
allow simple and secure attachment to M2D compact curvilinear
array loudspeakers being used for near and/or downfill
applications. All necessary hardware is included. Required for
use with PBF-MILO pull-back frame.
Product Compatibility
MILO
Kit Contents
(PN 40.132.130.01)
(2) MVE-MILO vertical extension bars
Product Compatibility
MILO/MILO 120
MTB-2D/M
Kit Contents
(PN 40.132.034.01)
(1) PBF-MILO pull-back frame
Product Compatibility
MILO/MILO 120
M2D
MG-2D
PBF-MILO
Kit Contents
(PN 40.132.033.01)
(2) MTB-2D transition bars
(4) .5" x 2.5" quick release pins
M SERIES PRODUCT