Advanced Package Training Scaffolding 2011.1 - Scia-Software GbR
Advanced Package Training Scaffolding 2011.1 - Scia-Software GbR
Advanced Package Training Scaffolding 2011.1 - Scia-Software GbR
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FLOOR BOARDS<br />
9<br />
<strong>Scaffolding</strong><br />
The input of floor board elements depends on the length of the ledgers. In the picture below all the<br />
possibilities are displayed. The total length of the ledger is shown at the bottom. The distance of the<br />
points, on which the floor board has to be entered, is displayed at the top.<br />
BRACINGS<br />
The wind bracings are entered with an eccentricity in the y direction of 48.3 mm (width of the profile): ey<br />
=+/- 48.3mm. This way the wind bracings are truly on top of the other members and not in between:<br />
CONNECTIONS<br />
Without eccentricity With eccentricity<br />
Standard – Standard connections<br />
The overlap length between two columns is 200 mm > 150 mm, so the columns are rigid in the x -<br />
direction.<br />
Moreover, the margin between two columns is 3.9 mm (=48.3 mm – 2 x 3.2 mm – 38 mm), this is<br />
less than 4 mm. Because of this, also the connection in the y and z direction are rigid.<br />
According to the code, also the following applies:
Change language