MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

Specifications
Serial interface: Interface operating mode: Full duplex
Level: COM1: RS-232,
COM2: RS-232,
UniCOM (optional): RS-232 or
RS-422/485 half duplex
Connection: CAW*P devices (IP44 protection):
25-pin D-Sub socket
CAW*S devices (IP69K protection):
Connection via screw terminals in the housing,
cable routed into the housing via a cable gland.
Transmission rate: 150, 300, 600, 1200, 2400, 4800, 9600, 19200 baud
(depending on the operating mode)
Number of data bits: 7, 8 bits
Parity: Space, odd, even, none (depending on the
operating mode)
Number of stop bits: 1 or 2
Handshake mode: Software (XON/XOFF), hardware (1 character after
CTS)
Protocols: SBI, XBPI-232 2) , XBPI-485 1)2) , SMA,
Profibus (UniCOM only) various printers:
– YDP01IS – YDP02IS label
– YDP01IS label – Universal
– YDP02 – YDP04IS
– YDP03 – YDP04IS label
– YDP02IS – YAM01IS Alibi memory
Network address 3) : 0, 1, 2, ..., 31
SBI: Manual data output: Without stability, after stability, configurable printout
SBI: Auto. data output: Without stability, at stability, at user-defined intervals
SBI: Output format: 16 or 22 characters
Printout of application data: Output of a configurable printout
Analog UniCOM interface (optional) Level: 4…20 mA, 0…20 mA, 0…5 V
Power supply: Internal or external
Factory setting: 4...20 mA, internal power supply
Connection: CAISL3 devices (IP44):
25-pin D-Sub socket
CAIS3 devices (IP69K):
Connection via screw terminals in the housing,
cable routed into the housing via a cable gland.
1) Optional UniCOM universal data interface
2) xBPI operating mode: 9600 baud, 8 data bits, parity: odd, 1 stop bit
3) Network address is valid only in xBPI-RS-485 operating mode
Data Interfaces
Operating Instructions Combics Complete Scales 97