MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

More documents

Recommendations

Info

Operation 12 C.EXT.D C.EXT.DEF. 88 Operating Instructions Combics Complete Scales External calibration and manual adjustment with default weights (weighing parameters: factory settings) Preparation t Select Setup menu: Press the M key. t Select Device parameters: Press the “O“ soft key. t Select weighing platform “WP 1,“ “WP 2:“ Press the “O“ soft key or t Select interface “COM 1,“ “COM 2“ or “UNICOM“ (depending on the interface): Press the “O“ soft key. t Select weighing platform “WP 3:“ Press the “O“ soft key. Calibration/Adjustment CAL key function o Ext. cal./adj.; factory-def. wt. Ext. cal./adj.; user-defined wt. Key blocked Cal./adj. sequence Cal. then auto adj. o Cal. then manual adj. isoCAL function (for Sartorius IS weighing platforms only) o Off Adjustment prompt Activate ext. adj. o Activated Deactivated Parameter for external weight o = Factory setting t To save settings and exit the Setup menu: Press the M key or the “oo“ soft key. Procedure t Zeroing the scale by pressing the ( key. t Start calibration/adjustment using the J key. y The display “C.EXT.D“ appears for two seconds. y You are prompted to place the required calibration/adjustment weight on the platform (e.g., 10 ,000 g).
External calibration Nom. + 10000 g Diff. + 1 g -------------------- 24.10.2010 10:15 Type CAIS3 Vers.no. 1.02.101110 BVers. 01-63-02 -------------------- External calibration Nom. + 10000 g Diff. + 1 g External adjustment Diff. + 0 g -------------------- 24.10.2010 10:15 Name: -------------------- t Place the calibration/adjustment weight on the weighing platform. y The difference between the measured value and the true weight of the sample will be displayed with plus/minus signs. y A printout will be generated if the adjustment is not carried out and the procedure is stopped by pressing the ( key. t Start adjustment via the J key (cancel calibration/adjustment via (). y The adjustment weight is displayed once adjustment is finished. y A GMP-compliant printout is generated. Operation Operating Instructions Combics Complete Scales 89
Page 1 and 2:
Operating Instructions Sartorius Co
Page 3 and 4:
2 Warning h Notes on Using this Man
Page 5 and 6:
3 Warning 3 Connect Installation wh
Page 7 and 8:
1 10 CAW3P 19 18 17 16 15 CAW3S | C
Page 9 and 10:
CAH3 models: Remove transport locks
Page 11 and 12:
3 Superstructures Shock Resistance
Page 13 and 14:
2 1 5 3 3 Please 4 Attaching the Ca
Page 15 and 16:
PS2 COM1 COM2 LED + Display Keypad
Page 17 and 18:
5 1 9 6 Interface Pin Assignment Ch
Page 19 and 20:
6 5 4 2 3 1 Interface Pin Assignmen
Page 21 and 22:
Configuring Weighing Platforms Serv
Page 23 and 24:
Device Parameters WP1 Internal Cali
Page 25 and 26:
Analog/Digital Converter (ADC) Purp
Page 27 and 28:
Analog/Digital Converter (ADC) Conf
Page 29 and 30:
Configuring Weighing Platforms Mult
Page 31 and 32:
The displays depicted in the next t
Page 33 and 34:
Configuring Weighing Platforms Proc
Page 35 and 36:
C.EXT.D C.EXT.DEF. Altitud C.EXT.DE
Page 37 and 38: Entering Adjustment and Linearizati
Page 39 and 40: C.EXT.D C.EXT.DEF. t Use the “O
Page 41 and 42: -------------------- 14.01.2010 13:
Page 43 and 44: 3 If 3 Adjustment h a serious opera
Page 45 and 46: If the weighing platform has multip
Page 47 and 48: External Linearization with the Fac
Page 49 and 50: -------------------- 14.01.2010 13:
Page 51 and 52: -------------------- 14.01.2010 13:
Page 53 and 54: ID D Toggles to the Info mode: Pres
Page 55 and 56: Saving Settings in Weighing Mode Yo
Page 57 and 58: Data in Tare Memory, Calculated Val
Page 59 and 60: Configuration You can configure the
Page 61 and 62: Setting up Password Protection t Pr
Page 63 and 64: Setup Overview (Parameters) o = Fac
Page 65 and 66: Device Parameters WP 1 Internal 1 )
Page 67 and 68: Device Parameters 1 ) Not with 8 da
Page 69 and 70: Device Parameters COM 1 1 ) Max. 2
Page 71 and 72: Device Parameters I/O control Bar c
Page 73 and 74: Device Parameters Operating paramet
Page 75 and 76: Setup Info Language Service Termina
Page 77 and 78: Automatic Taring The first weight o
Page 79 and 80: Adjustment/Configuration counter fo
Page 81 and 82: Tare the scale by placing a contain
Page 83 and 84: -------------------- 24.10.2010 10:
Page 85 and 86: G# + 6.433 kg T + 4.183 kg PT2 + 0.
Page 87: Operation Features Which of the fol
Page 91 and 92: SQmin Function Operation Purpose To
Page 93 and 94: Procedure t Place the container for
Page 95 and 96: Using Individual ID Code Example En
Page 97 and 98: Specifications Serial interface: In
Page 99 and 100: Configuring the Data Interface as a
Page 101 and 102: Data Input Format Data Interfaces Y
Page 103 and 104: Output of the weight value +1255.7
Page 105 and 106: h Example: Output of the weight val
Page 107 and 108: There are several actions that gene
Page 109 and 110: HEADER LINE1 HEADER LINE2 14.01.201
Page 111 and 112: “Checkweighing” Application The
Page 113 and 114: GMP-compliant printouts “Lineariz
Page 115 and 116: Error Codes Error Codes Errors are
Page 117 and 118: 2 Disconnect 2 If 2 Do 2 Disconnect
Page 119 and 120: Disposal If the packaging is no lon
Page 121 and 122: CAW*S... Model Resolutions Resoluti
Page 123 and 124: Device Dimensions Dimensions of CAH
Page 125 and 126: Accessories Product Order No. Verif
Page 127 and 128: Product Order No. Mechanical access
Page 129 and 130: Declaration of Conformity Declarati
Page 131 and 132: Declarations of Conformity Operatin
Page 133 and 134: Plates and Markings Operating Instr
Page 135 and 136: Plates and Markings Operating Instr
Page 137 and 138: Appendix: Guide to Verification of
Page 139 and 140:
Operating Instructions Combics Comp
Page 141 and 142:
Explosion-safe area 3. Connecting W
Page 143:
11.05.2012 Klausgrete Designation D
Page 148:
Sartorius Weighing Technology GmbH
show all

MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?