MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

Operation
Features Which of the following features are available depends on the connected weighing
platform. These features are configured in the Setup menu:
– Internal adjustment for several CAH models
– External adjustment blocked in verified weighing instruments
– External adjustment with the default weight value or user-defined weight
(not available on verified instruments) under “…Calibration/
adjustment:CAL key function.“
– Specify the weight for external calibration/adjustment under
“…Calibration/adjustment:Parameter for
external weight“
– Internal adjustment for IS weighing platforms
(configure under “COM1:, COM2: or UNICOM:WP3“)
– Block the J key to prevent the use of the functions described above under
“…Calibration/adjustment:CAL key function.“
– Calibrate first; then adjust automatically or manually (not for verified weighing
instruments) under “…Calibration/adjustment:
Cal/adj. sequence.“
– For Sartorius IS weighing platforms only:
Flashing WP symbol as adjustment prompt (if more than one weighing
platform is connected, the platform number is also displayed) under
“…Calibration/adjustment:CAL key function.“
– Block/Unblock external adjustment under
“…Calibration/adjustment:Activate ext.
adj..“
– Altitude and latitude or gravitational acceleration displayed after “Cal“ is
displayed at the start of the calibration/adjustment process if these values are
supported by the weighing platform under
“Device parameters:Operating parameters:
Display geogr. data.“
For each of these parameters, the term is displayed first (Altitude, Latitude
or Gravity) for 1 second, and then the corresponding value is displayed
continuously until you press J.
Operating Instructions Combics Complete Scales 87