MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

Operation
Device Parameters
Password Protection Access to device and application parameters can be password-protected against
unauthorized changes in the Setup menu under “Device parameters:
Password,“ see the “Setting up Password Protection“ section in the “Operating
Design“ chapter.
Acoustic Signal An acoustic signal (single beep for active, double beep for inactive keys) is emitted
when you press a key.
The acoustic signal can be turned on/off and linked to the green LED in
the Setup menu under “Device parameters:Operating
parameters:Acoustic signal.“
Keys Keys can be blocked/unblocked in the Setup menu under “Device
parameters:Operating parameters:Keys.“ The following
settings are available:
– All keys unblocked (default setting)
– All blocked except e and H
– Alphanumeric keys blocked
– n blocked
– ( blocked
– ) blocked
– k blocked
– J blocked
– p blocked
– K blocked
– L blocked
– c blocked
– Soft key 1…5 blocked
– D blocked
– H blocked
– c blocked
Automatic Shutoff of Combics You can specify that the indicator will shut off after a set time has elapsed in the
Setup menu under “Device parameters:Operating
parameters:Automatic shutoff,“
80 Operating Instructions Combics Complete Scales
Display Lighting The following settings can be made for display lighting in the Setup menu under
“Device parameters:Operating parameters:
Display:“
– Contrast
– Backlighting
– Model
Timer The timer used to turn the device and/or display lighting on/off can be set to 2, 4,
or 10 minutes in the Setup menu under “Device parameters:
Operating parameters:Timer.“