MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

More documents

Recommendations

Info

Operating Design Printing Parameter Settings Example: Maximum 20 characters per line. -------------------- 12.01.2010 09:46 Type CAIS3 Ser.no 12345678 Vers. 1.02.101110 BVers. 01-63-02 -------------------- SETUP DEVICE -------------------- WP 1 Internal WP 2 off COM1 Data communcations SBI Baud rate 1200 Baud Parity Odd Number of Stop bits 1 Stop bit Handshake mode Hardware 1-char Number of data bits 7 Bit Data output Printout printer 1 etc. 62 Operating Instructions Combics Complete Scales
Setup Overview (Parameters) o = Factory settings W = User-defined setting Setup Application parameters: Please refer to the “Basic Application Programs” manual Fn key function Device parameters WP 1 RS-232 1 ) o Off Unit conversion SQMIN (only possible when the display has been turned on in the “Device parameters:SQMin“ menu item) SBI standard SBI verifiable o IS-232 ADC-232 RS-485 1 ) o IS-485 ADC-485 Internal Calibration/Adjustment CAL key function Adapt filter Application filter Stability range 1 ) Equipment version: – then blocked internally 2 ) Not available on devices verified for use in legal metrology 3 ) Only when operated with Sartorius IS weighing platforms or an external ADC Cal./adj. sequence isoCAL function 3 ) o Ext. cal./adj.; factory-def. wt. Ext. cal./adj.; user-defined wt. Key blocked Cal. then auto adjust o Cal. then manual adjust o Off Adjustment prompt Activate external adjustment 2 ) o Activated Deactivated Parameter for external weight Cal./adj. weight: Calibration/adjustment unit Grams /g Kilograms /kg Tons /t Pounds /lb Min. vibration o Normal vibration Strong vibration Extreme vibration o Final readout Filling mode Low filtering Without filtering 1/4 digit 1/2 digit 1 digit 2 ) o 2 digits 2 ) 4 digits 2 ) 8 digits 2 ) Operating Design Operating Instructions Combics Complete Scales 63
Page 1 and 2:
Operating Instructions Sartorius Co
Page 3 and 4:
2 Warning h Notes on Using this Man
Page 5 and 6:
3 Warning 3 Connect Installation wh
Page 7 and 8:
1 10 CAW3P 19 18 17 16 15 CAW3S | C
Page 9 and 10:
CAH3 models: Remove transport locks
Page 11 and 12: 3 Superstructures Shock Resistance
Page 13 and 14: 2 1 5 3 3 Please 4 Attaching the Ca
Page 15 and 16: PS2 COM1 COM2 LED + Display Keypad
Page 17 and 18: 5 1 9 6 Interface Pin Assignment Ch
Page 19 and 20: 6 5 4 2 3 1 Interface Pin Assignmen
Page 21 and 22: Configuring Weighing Platforms Serv
Page 23 and 24: Device Parameters WP1 Internal Cali
Page 25 and 26: Analog/Digital Converter (ADC) Purp
Page 27 and 28: Analog/Digital Converter (ADC) Conf
Page 29 and 30: Configuring Weighing Platforms Mult
Page 31 and 32: The displays depicted in the next t
Page 33 and 34: Configuring Weighing Platforms Proc
Page 35 and 36: C.EXT.D C.EXT.DEF. Altitud C.EXT.DE
Page 37 and 38: Entering Adjustment and Linearizati
Page 39 and 40: C.EXT.D C.EXT.DEF. t Use the “O
Page 41 and 42: -------------------- 14.01.2010 13:
Page 43 and 44: 3 If 3 Adjustment h a serious opera
Page 45 and 46: If the weighing platform has multip
Page 47 and 48: External Linearization with the Fac
Page 49 and 50: -------------------- 14.01.2010 13:
Page 51 and 52: -------------------- 14.01.2010 13:
Page 53 and 54: ID D Toggles to the Info mode: Pres
Page 55 and 56: Saving Settings in Weighing Mode Yo
Page 57 and 58: Data in Tare Memory, Calculated Val
Page 59 and 60: Configuration You can configure the
Page 61: Setting up Password Protection t Pr
Page 65 and 66: Device Parameters WP 1 Internal 1 )
Page 67 and 68: Device Parameters 1 ) Not with 8 da
Page 69 and 70: Device Parameters COM 1 1 ) Max. 2
Page 71 and 72: Device Parameters I/O control Bar c
Page 73 and 74: Device Parameters Operating paramet
Page 75 and 76: Setup Info Language Service Termina
Page 77 and 78: Automatic Taring The first weight o
Page 79 and 80: Adjustment/Configuration counter fo
Page 81 and 82: Tare the scale by placing a contain
Page 83 and 84: -------------------- 24.10.2010 10:
Page 85 and 86: G# + 6.433 kg T + 4.183 kg PT2 + 0.
Page 87 and 88: Operation Features Which of the fol
Page 89 and 90: External calibration Nom. + 10000 g
Page 91 and 92: SQmin Function Operation Purpose To
Page 93 and 94: Procedure t Place the container for
Page 95 and 96: Using Individual ID Code Example En
Page 97 and 98: Specifications Serial interface: In
Page 99 and 100: Configuring the Data Interface as a
Page 101 and 102: Data Input Format Data Interfaces Y
Page 103 and 104: Output of the weight value +1255.7
Page 105 and 106: h Example: Output of the weight val
Page 107 and 108: There are several actions that gene
Page 109 and 110: HEADER LINE1 HEADER LINE2 14.01.201
Page 111 and 112: “Checkweighing” Application The
Page 113 and 114:
GMP-compliant printouts “Lineariz
Page 115 and 116:
Error Codes Error Codes Errors are
Page 117 and 118:
2 Disconnect 2 If 2 Do 2 Disconnect
Page 119 and 120:
Disposal If the packaging is no lon
Page 121 and 122:
CAW*S... Model Resolutions Resoluti
Page 123 and 124:
Device Dimensions Dimensions of CAH
Page 125 and 126:
Accessories Product Order No. Verif
Page 127 and 128:
Product Order No. Mechanical access
Page 129 and 130:
Declaration of Conformity Declarati
Page 131 and 132:
Declarations of Conformity Operatin
Page 133 and 134:
Plates and Markings Operating Instr
Page 135 and 136:
Plates and Markings Operating Instr
Page 137 and 138:
Appendix: Guide to Verification of
Page 139 and 140:
Operating Instructions Combics Comp
Page 141 and 142:
Explosion-safe area 3. Connecting W
Page 143:
11.05.2012 Klausgrete Designation D
Page 148:
Sartorius Weighing Technology GmbH
show all

MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

Create successful ePaper yourself

Delete template?

Save as template?