MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

Lines for metrological data
Bar graph
Info/Status line
Line for measured values
Text lines
Operating Design
Soft key labels
Plus or minus sign
Stability
Application symbol
Tare memory
Calculated values
Unit
Battery symbol
Display in Weighing Mode
Weighing Mode: Display of Measured and Calculated Values
The display is divided into several sections.
Lines for metrological data The following parameters are shown here:
Symbols and Their Meaning
Measured Value Line/Calculated Values
Unit and Stability
56 Operating Instructions Combics Complete Scales
Max Maximum capacity (upper weighing range limit) of the active weighing platform
Min Minimum capacity (lower weighing range limit) of the active weighing
(verified models only)
e Verification scale interval of the active weighing platform (verified models only)
d Smallest display digit of the active weighing platform
R1 R2 Display of the current weighing range of the active weighing platform
(with multiple range scale connected)
b The Busy symbol appears when the scale is processing a function activated
by pressing a key.
+ - The plus or minus sign of the weight or other measured value
o Verified models only:
Identifies “zero” as a weight value (after the scale or the active weighing platform
has been zeroed)
5.23r The current weight value (on verified scales or platforms with e = d, the last digit is
bordered for identification)
20 A calculated value when using an application program, such as Counting or
Weighing in Percent
g The current weight unit (e.g. “g“)
pcs Identifies additional characteristics (e.g. “pieces“ for the “Counting“ application)
When the weighing system reaches stability, the weight unit or calculation unit is
displayed here.