MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius
MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius
MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
C.EXT.D<br />
C.EXT.DEF.<br />
t Use the “O“ soft key to open the CAL key function“ menu.<br />
y The “CAL key function“ submenu is displayed.<br />
t Use the “Q“ or “q“ soft key to select the corresponding menu item and confirm<br />
with “l.“<br />
y The menu item is marked by a circle “o.“<br />
Note<br />
The functions that can be configured in the “CAL key function“<br />
submenu depends on the selected weighing platform and its configuration data.<br />
Functions that cannot be accessed are not displayed in the selection screen.<br />
Important Note!<br />
The function set in the “CAL key function“ menu is carried out in the<br />
normal weighing mode because when you exit the Setup menu the Service mode is<br />
deactivated. To perform the function on a digital weighing platform (such as an<br />
IS platform), however, it must be carried out in Service mode.<br />
t The procedure is as follows: after selecting the desired function and exiting<br />
the Setup menu, reactivate Service mode again and then exit the Setup menu<br />
immediately by pressing the M key or the “oo“ soft key.<br />
y The scale is now in Service mode without this being displayed.<br />
t Trigger the previously set function using the J key.<br />
Configuring Weighing Platforms<br />
12 y The display shows “S_CAl:“ indicating that the scale is in Service mode.<br />
t The corresponding menu item can be selected using the “Select“ soft key<br />
and carried out using the J key.<br />
t If you cancel the function using the ( key or by restarting the scale using<br />
the e key, you will exit the Service mode.<br />
External Calibration/Adjustment<br />
with Factory-Defined Weight (Default Weight)<br />
Configuration If not already selected (factory setting, marked by “o“ when active), select the<br />
“CAL key function:Ext. cal./adj.; factorydef.<br />
wt.“ menu item (external adjustment with a factory-defined, standard<br />
weight).<br />
t Use the “Q“ or “q“ soft key to select this menu item and confirm with “l.“<br />
y The menu item is marked by a circle “o.“<br />
Note:<br />
The menu items “Ext. cal./adj.; factory-def. wt.“<br />
(external adjustment with a factory-defined, standard weight), “Ext. cal./<br />
adj.; user-defi ned wt.“ (external adjustment with<br />
a user-defined weight) and “Key blocked“ can also be accessed without<br />
activating the Service mode.<br />
Operating Instructions <strong>Combics</strong> <strong>Complete</strong> <strong>Scale</strong>s 39
Change language