MAN-Combics Complete Scale CAW3P CAW3S CAH3-e - Sartorius

Data Interfaces
Setting the SBI Data Output
Data output settings can be made in the Setup menu under “Data
communications:SBI:Data output.“
The following options are available:
– The displayed value, with or without stability check
– Automatic output of the displayed value, either with or without stability check,
or automatically at defined intervals
– Output of a printout as configured in the “Device parameters:
Config. printout:Printer 1“ or “Printer 2“ (see next
page).
You can define the printout content by specifying which blocks of information are
to be included (see “Configuring Printouts”).
In general, the current display value is output (weight with unit, calculated value,
alphanumeric display) unless you configure a user-definable data record.
Generally, data is output only after the weighing instrument has stabilized (factory
setting). Here you can define whether data is output on request or automatically,
at stability or without stability check; and configure a user-defined printout.
The data output for “without stability“ must be set accordingly (SBI: Data output).
If you select time-dependent automatic printout, you need to define the print
interval (in display updates) as well.
Each line of a printout can contain up to 20 characters. The first 6 characters,
called the “data header”, identify the subsequent value. Only 14 characters are
available if you disable the header. This is carried out in the “Line format“ menu
item (see also “Setup Overview“ in “Configuration“).
Automatic Data Output (SBI) You can have the weight readout printed automatically 1 ). This printout can be
generated after a certain number of display updates 2 ). You can also configure
whether or not the auto-print function is dependent on the stability of the scale 3 ).
The display update frequency depends on both the scale model and the operating
status.
Examples:
N + 153.00 g Net weight
Stat Display blank
Stat L Display underload
Stat H Display overload
100 Operating Instructions Combics Complete Scales
„Data output“ setting:
1) 3) Automatic, without stability or automatic with stability.
Factory setting: Manual after stability; i.e., automatic data output function off.
2) Time-dependent automatic data output:
Interval: 1, 2, 10 or 100 display updates
Factory setting: 1 display update