Alkyl Ketene Dimer (AKD) sizing – a review

during paper manufacturing and upgrading, Wochenbl. für Papierfab.
129(23/24), 1589-1596.
Hubbe, M. ,A. (2006): Paper´s resistance to wetting – A review of internal sizing
chemicals and their effects, Bioresources, 2(1), 106-145.
Hutton, B. and Chen, W. (2004): Sizing effects via AKD vaporisation, 58th Appita
Annual Conf. and Exhibition, Canberra, ACT, Australia.
Isogai, A. (1997a): Factors influencing on retention of alkyl ketene dimer, The
Fundamentals of Papermaking, Trans. of the 11th Fund. Res. Symp. held at
Cambridge, Pira International, 1047-1071.
Isogai, A. (1997b): Effect of cationic polymer addition on retention of alkyl ketene
dimer, J. Pulp Paper Sci. 23(6), J276-J281.
Isogai, A. and Asakura, K. (2001a): Paper sizing by liquid – type of ketene
dimers Part 1. Comparison with alkyl ketene dimer and oleic anhydride, Nord.
Pulp Paper Res. J. 16(2), 103-107.
Isogai, A. and Asakura, K. (2001b): Paper sizing by liquid-type ketene dimers.
Part 2. Effects of drying methods, UV and air-blowing treatments on PCC-filled
sheets, Nord. Pulp Paper Res. J. 16(2), 108-112.
Isogai, A., Kitaoka, C. and Onabe, F. (1997): Effects of carboxyl groups in pulp
on retention of alkyl ketene dimer, J. Pulp Paper Sci. 23(5), J217-J219.
Jiang, H. and Deng, Y. (2000): The effects of inorganic salts and precipitated
calcium carbonate filler on the hydrolysis kinetics of alkyl ketene dimer, J. Pulp
Paper Sci. 26(6), 208-213.
Johansson, J. and Lindström, T. (2004b): A study on AKD-size retention, reaction
and sizing efficiency. Part 2: The effects of electrolytes, retention aids, shear
forces and mode of addition on AKD-sizing using anionic and cationic AKD-dispersions,
Nord. Pulp Paper Res. J. 19(3), 336-344.
Lidén, J. and Tollander, M. (2004): Extractives in totally chlorine free bleached
birch pulp and their effect on alkyl ketene dimers and alkeny succinic anhydride
sizes, Nord. Pulp Paper Res. J. 19(4), 466-469.
Lindström, T. and Glad-Nordmark, G. (2007a): A study of AKD-size retention,
reaction and sizing efficiency. Part 3: The effects of fibre charge density and electrolyte
concentration on size retention, Nord. Pulp Paper Res. J. 22(2), 161-166.
Lindström, T. and Glad-Nordmark, G. (2007b): A study of AKD-size retention,
reaction and sizing efficiency. Part 4: Mechanism of AKD-hydrolysis, Nord. Pulp
Paper Res. J. 22(2), 167-171.
Lindström, T. and O´Brian, H. (1986b): On the mechanism of sizing with alkyl
ketene dimers.Part II. The kinetics of reaction between alkyl ketene dimers and
cellulose, Nord. Pulp Paper Res. J. 1(1), 34-42.
Lindström, T. and Söderberg, G. (1986a): On the mechanism of sizing with alkyl
ketene dimers. Part I. Studies on the amount of alkyl ketene dimer required for
sizing of different pulps, Nord. Pulp Paper Res. J. 1(1), 26-33.
Lindström, T. and Söderberg, G. (1986c): On the mechanism of sizing with alkyl
ketene dimers. Part III. The role of pH, electrolytes, retention aids, extractives, Calignosulfonates
and mode of addition on alkyl ketene dimer retention, Nord. Pulp
Paper Res. J, 1(2), 31-38.
Lindström, T. and Söderberg, G. (1986d): On the mechanism of sizing with alkyl
ketene dimers. Part IV. The effects of HCO 3-ions and polymeric reaction accelerators
on the rate of reaction between alkyl ketene dimers and cellulose, Nord. Pulp
Paper Res. J. 1(2), 39-45.
Lundqvist, Å. and Ödberg, L. (1997): Surface energy characterization of surface
modified cellulosic fibres by inverse gas chromatography, in The Fundamentals of
Papermaking Materials. Trans of the 11th Fund. Res. Symp. Sept. 1997, held at
Cambridge, UK, Pira International, Leatherhead, Surrey, UK, Vol 1, pp. 751-769.
Luner, P.E. and Oh, E. (2001): Characterization of the surface free energy of cellulose
ether films, Coll. Surf. A. Phys. Chem. Eng Asp. 181, 31-48.
Mattsson, R., Lindström, D., Sterte, J. and Ödberg, L. (2003): Influence of abietic
acid, betulinol, sodium oleate and tripalmitine on the migration of AKD in
paper, J. Pulp Paper Sci. 29(8), 281-285.
Mattsson, R., Sterte, J. and Ödberg, L. (2001): Colloidal stability of alkyl ketene
dimer (AKD) dispersion: Influence of shear, electrolyte concentration, polyelectrolytes
and surfactants, The Science of Papermaking, 12th Fundamental Res.
Symp. Oxford, The Pulp and Paper Fundamental Res. Soc., 393-413.
Mattsson, R., Sterte, J. and Ödberg, L. (2002): Sizing with pre-flocculated alkyl
ketene dimer (AKD) dispersions, Nord. Pulp Paper Res. J. 17(3), 240-245.
Nahm, S. (1986): Direct evidence for covalent bonding between ketene dimer
sizing agents and cellulose, J. Wood Chem. Technol. 6(1), 89-112.
Novak, R. and Rende, D. (1993): Size reversion in alkaline papermaking, Tappi J.
76(8), 117-120.
Petander, L., Ahlskog, T. and Juppo, A. J. (1998): Strategies to reduce AKD
deposits on paper machines, Paperi Puu, 80(2), 100-103.
Reynolds, W. F. (1989): The Sizing of Paper, Tappi Press, Atlanta, GA, USA.
Riebeling, U., Jeurissen, H.F.M., De Clercq, A. and Prinz, M. (1996): Ein neues
Masseleimungskonzept-Wirkungsverbesserung von AKD durch Einsatz hydrophober
amphoterer Polymere, Wochenbl. für Papierfab. 22, 997-1002.
Riebeling, U., Jeurissen, H.F.M., Höhr, L. and Schall, N. (1999):
Wirkungsverbesserung von AKD durch Einsatz hydrophober amphoterer Polymere
(Teil 2), Wochenbl. für Papierfab. 5, 318-322.
Roberts, J.C. (1997): A review of advances in internal sizing of paper, The
Fundamentals of Papermaking, Trans. of the 11th Fund. Res. Symp., Cambridge,
Pira International, 209-263.
Roberts, J.C. and Garner, D.N. (1985): The mechanism of alkyl ketene dimer
sizing of paper. Part 1, Tappi J. 68(4), 118-121.
Roberts, J.C., Garner, D.N. and Akpabio, U.D. (1985): Neutral sizing and the
mechanism of alkyl ketene dimer sizing, “Papermaking raw materials” Trans. of
the eighth Fundamental Res. Symp. held at Oxford, 1985, 2 (3), 815-837.
Schinzer, D. (1986): Selectives in Lewis Acid Promoted Reactions. Kluwer
Academic Publishers, Dordrecht, The Netherlands
Seppänen, R., Tiberg, F. and Valignat, M.-P. (2000): Mechanism of internal
sizing by alkyl ketene dimers (AKD): The role of the spreading manolayer precourser
and autophobicity, Nord. Pulp Paper Res. J. 15(5), 452-458.
Shchukarev, A.V., Mattsson, R. and Ödberg, L. (2003): XPS imaging of surface
diffusion of alkyl ketene dimer on paper surfaces, Coll. Surf. A: Phys. Chem. Eng.
Asp. 219(1-3), 35-43.
Shen, W., Brack, N., Ly, H., Parker, I., Pigram, P.J. and Liesegang, J. (2001a):
Mechanism of AKD migration studied on glass surfaces, Coll. Surf. A: Phys.
Chem. Eng. Asp. 176(2-3), 129-137.
Shen, W. and Parker, I. (2003): An experimental investigation of the redistribution
behaviour of alkyl ketene dimers and their correponding ketones, Coll. Surf.
A: Phys. Chem. Eng. Asp. 212(2-3), 197-209.
Shen, W. and Parker, I.(2003): A study of non-solid behaviour of AKD wax,
APPITA, 56(6), 442-444.
Shen, W., Parker, I., Brack, N. and Pigram, P.J. (2001b): A simplified approach
to understanding the mechanism of AKD sizing, APPITA, 54(4), 352-356.
Shen, W., Zhang, H. and Ettl, R. (2005): Chemical composition of “AKD vapour”
and its implication to AKD vapour sizing, Cellulose, 12(6), 641-652.
Ström, G., Carlsson, G. and Kiær, M. (1992): Bestimmung der Alkylketenedimerverteilung
in Probeblättern mittels elektron spektroskopie (ESCA), Wochenbl.
Papierfabr. 120(15), 606-611.
Thorn, I., Dart, P. ,J. and Main, S. ,D. (1993): The use of cure promotors in alkaline
sizing, Paper Technol. 34(1), 41-45.
Walkden, S. ,A. (1991): Alkaline advance helps liquid packaging board meet
rigorous specifications, Tappi J. 74(4), 103-104.
Yu, L. and Garnier, G. (2002): The role of vapour deposition during internal
sizing: A comparative study between ASA and AKD, J. Pulp Paper Sci. 28(10),
327-331.
Åvitsland, G., Sterner, M., Wågberg, L. and Ödberg, L. (2006): AKD sizing TCF
and ECF bleached birch pulp characterized by peroxide edge wicking index, Nord.
Pulp Paper Res. J. 21(2), 237-244.
Ödberg, L., Lindström, T., Liedberg, B. and Gustavsson, J. (1987): Evidence
for β-ketoester formation during the sizing of paper with alkyl ketene dimers,
Tappi J. 70(4), 135-139.
Manuscript received October 8, 2007
Accepted March 16, 2008
Nordic Pulp and Paper Research Journal Vol 23 no. 2/2008 209