Huron & SNAP Documentation

Adding Room Reverberation
↓ To add room reverberation to
the simulation
↓ To insert a room between
existing rooms
↓ To Delete a room response from
the Rooms List
THE SIMULATION TOOLS
Room reverberation may be produced using convolution filters
derived from a room simulation package such as CATT-
Acoustics, or the Lake Technology MakeRoom program.
1. Click Rooms. The rooms dialogue box will appear (Figure
34).
Figure 32 — The Sound Field Filter Rooms dialogue box
2. Click Add.
3. Select a Room Response file (*.GEO) from the file
selection list. A selection of pre-created *.GEO files is
present on the software CD supplied with your system under
the rooms/aniscape directory.
4. Click OK to Load the Response file.
— or —
Click Cancel to cancel the loading of the Response.
5. Click Close to Close the room dialogue box.
From the Sound Field Filter Main window.
1. Click Rooms.
2. Select an entry from the Room Response list under which
the room filter is to inserted.
3. From the Rooms dialogue box Click Insert.
4. Select a Room Response file (*.GEO) from the file
selection list.
5. Click OK to Insert the Room response.
6. Click Cancel to cancel the insertion of the Room response.
1. Click Rooms.
2. Select an entry from the Rooms Response list to delete.
3. From the Rooms dialogue box Click Delete.
4. Click OK to delete the Room filter.
— or —
HURON TECHNICAL MANUAL PAGE 95