Huron & SNAP Documentation

Inserting speakers
↓ To insert a speaker into the list
Deleting speakers
↓ To delete a speaker from the list
Pre-calculating Speaker Activations
↓ To pre-calculate the speaker
activations
↓ To save speaker activations
↓ To load a set of pre-calculated
speaker activations
THE SIMULATION TOOLS
1. Click Insert to add a speaker into the currently selected
speaker location.
2. Once added, select and edit the location values.
1. Select the speaker to delete.
2. Click Delete and the speaker will be removed from the list.
Once a Speaker array has been defined it, needs the speaker
activations to be pre-calculated. Calculating the speaker
activations may require some time, however, once complete it
provides access to the real time panning of sources across the
speaker array.
Once speakers have been set up, the speaker activations can be
pre-calculated.
• Click Calculate to calculate the speaker activations.
A Cancel button window will appear to enable the calculation
process to be cancelled if cancelled the speaker activations will
not be calculated. The progress of the calculation may be
checked in the status bar which progresses from left to right as
the calculation continues.
1. Click Save to save speaker activations.
2. A Save File dialogue box will appear.
3. Select or type a new filename and the pre-calculations will
be saved in a speaker weight file with the *.3dw extension.
1. Click Load to load previously calculated speaker
activations.
2. A dialogue box will appear.
3. Select a *.3dw file.
4. Click OK.
HURON TECHNICAL MANUAL PAGE 85