Huron & SNAP Documentation
Huron & SNAP Documentation Huron & SNAP Documentation
Removing Channels from a Group ↓ To remove channels from a group Splitting Channels ↓ To split volume controls to a new window Split Windows ↓ To change the name of a split window THE SYSTEM TOOLS 1. Click the Channel Number Box of the channels to remove from a group. 2. Click the Ungroup Box. Input and output sliders can be cloned from the IO Manager panel into their own window. This splitting of channels allows the user to focus on controlling the gain of selected channels. 1. Click the Channel Number Box of the channels to be split. Each click should highlight a channel. 2. Click the Split Button. All of the channels in the selected group will re-appear in their own window. Figure 19 — Split volume control window Split channels appear in a separate window. They behave in the same way as normal volume adjustment channels, with the exception that you cannot group from, or split from, a previously split window. 1. Click in the title box of the split window. 2. Type a new name for the split window. 3. Press Enter. HURON TECHNICAL MANUAL PAGE 62
↓ To close a split window Summary THE SYSTEM TOOLS • Click the system menu box in the top left hand corner of the window. • The IO Manager is used for setting input and output gain levels, viewing digital input status, and setting digital output format. • The current values of channel volumes can be read graphically and textually in the IO Manager. HURON TECHNICAL MANUAL PAGE 63
- Page 13 and 14: Table of Contents DISCLAIMER.......
- Page 15 and 16: TABLE OF CONTENTS FEATURES ........
- Page 17 and 18: TABLE OF CONTENTS OPERATION .......
- Page 19 and 20: TABLE OF CONTENTS DC BLOCK.........
- Page 21 and 22: TABLE OF CONTENTS THE 96KHZ EQ ....
- Page 23: Introduction to the Huron Thank you
- Page 26 and 27: Features Applications Note: Any ISA
- Page 28 and 29: INTRODUCTION TO THE HURON • Optio
- Page 30 and 31: Installing New Hardware Components
- Page 32 and 33: ↓ To change the ISA memory addres
- Page 35 and 36: ↓ Connecting with the patch panel
- Page 37 and 38: Huron System Tools Huron Simulation
- Page 39 and 40: General Installation ↓ To install
- Page 41: Introduction to the System Tools Th
- Page 44 and 45: Operation Starting ↓ To start the
- Page 46 and 47: Configuration Functions Internal/Ex
- Page 48 and 49: Displaying, Hiding and Terminating
- Page 50 and 51: Stopping VRack ↓ To exit the VRac
- Page 52 and 53: Patching ↓ To connect a pair of p
- Page 54 and 55: Tip: Even if two patch points are c
- Page 57 and 58: Introduction Features The IO Manage
- Page 59 and 60: Adjusting Volumes ↓ To adjust the
- Page 61: ↓ To set a digital output to prof
- Page 66 and 67: THE SIMULATION TOOLS InsideTrak, Fa
- Page 68 and 69: THE SIMULATION TOOLS • Angle chan
- Page 70 and 71: Z THE SIMULATION TOOLS Figure 22
- Page 73 and 74: Features Operation Object list Add
- Page 75 and 76: For example: if a Source Object (ch
- Page 77 and 78: Editing a BinScape Object ↓ To ed
- Page 79 and 80: Features Operation The Space Array
- Page 81 and 82: Adding an Object to the Space Array
- Page 83 and 84: Near Field Adding B-format Input Se
- Page 85 and 86: Inserting speakers ↓ To insert a
- Page 87: Summary 25 20 15 Number of inputs S
- Page 90 and 91: The simulated acoustic spaces used
- Page 92 and 93: ↓ To access the Sound Field Filte
- Page 94 and 95: Directivity Factor Name d = 0.000 O
- Page 96 and 97: Setting Minimum Source Distance ↓
- Page 98 and 99: Adding, Inserting, Removing and Edi
- Page 100 and 101: DSP Usage Summary THE SIMULATION TO
- Page 102 and 103: ↓ To access the Binaural Decoder
- Page 104 and 105: Summary THE SIMULATION TOOLS • Th
- Page 106 and 107: Starting ↓ To access MultiScape F
- Page 108 and 109: Editing a Sound Object ↓ To edit
- Page 110 and 111: B-format Decode Mode B-format Mode
↓ To close a split window<br />
Summary<br />
THE SYSTEM TOOLS<br />
• Click the system menu box in the top left hand corner of the<br />
window.<br />
• The IO Manager is used for setting input and output gain<br />
levels, viewing digital input status, and setting digital output<br />
format.<br />
• The current values of channel volumes can be read<br />
graphically and textually in the IO Manager.<br />
HURON TECHNICAL MANUAL PAGE 63
Change language