Huron & SNAP Documentation

Adjusting Volumes
↓ To adjust the volume of a given
channel
Adjusting Input Level Gain
↓ To adjust the input gain level of
an input channel
Note: The volume and input level
settings are effective throughout the
system, and will be saved when the
current workspace is saved.
Muting an Output
↓ To mute an output channel
↓ To unmute an output channel
↓ To mute all outputs
↓ To unmute all outputs
Either
Figure 16 — Controls for adjusting volume
THE SYSTEM TOOLS
• Click the on the Volume slider bar to select the desired
volume level.
— or —
Drag the Volume slider bar to the desired level.
— or —
Type in a volume level from -30 to +30 dB.
• Click on the desired input gain level.
The current gain level will be set to the level indicated by the
graphical switch.
• Click on the Mute box above the channel to mute.
• Click on the Mute box above the channel which is muted.
• Click Mute All.
• Click the previously selected Mute All.
HURON TECHNICAL MANUAL PAGE 59