Huron & SNAP Documentation

Altering the XYZ Balance
↓ To alter the XYZ Balance levels
of the inputs
Altering the Azimuth
Azimuth can be defined as the facing
to an object on a horizontal plane.
Values start at 0.00 for forward and
increase as the object is further to the
left, up to 360.00
↓ To alter the Azimuth of the
inputs
Altering the Elevation
↓ To alter the Elevation of the
inputs
Viewing BFormat Mixer Metering
↓ To view the BFormat Mixers
metering
OTHER TOOLS
The XYZ balance in the BFormat mixer represents the gain for
the XYZ portions of the BFormat signals.
1. Select either the input 1 or input 2 XYZ Balance box.
2. Type the new XYZ balance value in dB (this number must
be negative).
3. Click Apply.
The Azimuth of a BFormat signal represents the direction a
sound appears to be coming from on a horizontal plane.
1. Select either the input 1 or input 2 Azimuth level box.
2. Type the new azimuth value.
3. Click Apply.
The elevation of a BFormat signal represents the apparent
vertical angle from which the sound comes.
1. Select either the input 1 or input 2 Elevation box.
2. Type the new elevation value.
3. Click Apply.
The BFormat Mixer provides metering for the inputs and
outputs of the BFormat Mixer.
• Click Meters.
The BFormat meters window will appear.
HURON TECHNICAL MANUAL PAGE 282