Huron & SNAP Documentation

INTRODUCTION TO THE HURON
• Optional ISA cards. Any ISA bus card may be optionally
incorporated into the Huron system.
• Optional PCI cards. Any PCI cards may be optionally
incorporated into the Huron system.
The following diagrams illustrate the Huron chassis (Figure 2
and Figure 3). The system illustrated has a Huron ADAT I/O
card in slot 0, a DSP card in slot 1, an I/O carrier card in slot 2,
and a RME Hammerfall digital audio PCI card for use with the
WavePlayer-2 application.
Figure 2 — Front elevation of the Huron.
1 Reset switch 14 Parallel port connector
2 Keyboard lock 15 SVGA port Connector
3 Power indicator 16 Mouse connector
4 Hard disk indicator 17 COM1 connector
5 Keyboard lock indicator 18 Keyboard connector
6 Power switch 19 I/O connector
7 Floppy disk drive 20 Huron ADAT I/O connectors
8 CD-ROM Drive 21 Hammerfall SPDIF I/O and ADAT Sync connector
9 Power Supply Unit 22 Hammerfall ADAT1 and ADAT2 I/O connectors
10 Mains inlet 23 Hammerfall ADAT3 I/O connectors
11 Mains outlet 24 Hammerfall Word Clock out connector
12 Ethernet connector 25 Hammerfall Word Clock in connector
13 COM2 connector
HURON TECHNICAL MANUAL PAGE 28