Huron & SNAP Documentation

Operation
Starting
↓ To access the AB Switcher
Selecting an Output Pair
ABSwitcher
The AB Switcher provides a fast switching mechanism for
undertaking AB comparisons of headphone related applications.
The AB Switcher uses one DSP worth of resources.
Figure 94 — The AB Switcher interface
The AB Switcher must be loaded into the VRack through the
New/Others Tools submenu (for loading instructions see the
System Tools section of this manual). Once loaded, the AB
Switcher will appear in the VRack, and its associated patchset
will appear in the Patch Bay.
• Click on the AB Switcher panel in the VRack.
The AB Switcher window will appear (see Figure 94).
The AB Switcher takes a series of inputs and presents them to a
set of outputs. In order to do A to B comparisons it is possible
to switch the output between input pairs.
HURON TECHNICAL MANUAL PAGE 279