Huron & SNAP Documentation

↓ To lock a Slider
↓ To unlock a Slider
Modifying Overall Cut/Boost
↓ To alter the overall cut/boost of
a filter
Zooming In and Out
THE EQUALISATION TOOLS
1. Select the Slider to be locked.
2. Click the Lock check box in the dialogue bar, next to the
option to be locked.
— or —
Select the appropriate option to lock from the Filter menu.
In the example illustrated below the frequency and the
bandwidth are locked.
Figure 88 – Locked frequency and bandwidth
1. Select the Slider to be unlocked.
2. Click the Checked Lock check box in the Dialogue bar,
next to the option to be unlocked.
— or —
Select the appropriate option to unlock from the Filter
menu.
A special slider has been included on each EQ canvass which
allows the adjustment of the cut/boost over all frequencies.
• Drag the special slider found at the right hand side of the
canvass.
Figure 89 – Cutting or boosting a filter
Cut/Boost
slider
A zoom feature for canvasses has been provided to allow for
more accurate adjustments of sliders on the canvass.
HURON TECHNICAL MANUAL PAGE 262