Huron & SNAP Documentation

Locator Commands
General Commands
Source and Listener Object Control
OTHER SIMULATION TOOLS
This subsection lists the commands recognised by Locator when
parsing Locator scripts.
Time T
All following commands up to the next Time command will be
executed T (Integer +ve) tenths of a second after the Play button
is clicked.
SetWorkspace workspace
Set VRack workspace to “workspace” (String as a path to a file
and filename with a *.WSP extension).
Exec command
Execute command (String) in Windows shell. If the exec
command is launching the VRack, the exec command requires
that the full path to the *.WSP file is given eg.
c:\huron30\rack32.exe c:\huron30\bin\huron.wsp
Repeat
Set time index to 0 - Restarts the script.
#
Comment line. All chars to the end of the line are ignored.
Loc N X Y Z
Move the object specified by location channel N (Integer +ve)
from its current position, to the location X,Y,Z (Float)
coordinates (in metres from origin). Location channel numbers
must be in the range 1 to 255.
Ang N A E R
Send Angle message with Azimuth A (0-360 degrees),
Elevation E (0-360 degrees) and Roll R (0-360 degrees) degrees
on Angle channel N (Integer +ve).
Jump N X Y Z vX vY vZ
Set object at location channel N (Integer +ve) to new location
X,Y,Z ( in meters from origin) and set velocity in the X plane to
vX, the velocity in the Y plane to vY and the velocity in the Z
plane to vZ.
SetDirFactor nSource DirFactor
(Sound Field Filter)
This command sets the Directivity Factor, DirFactor (Float) of a
sound nSource object (Integer, as an index to the objects in the
sound object list) in Sound Field Filter.
HURON TECHNICAL MANUAL PAGE 178