Huron & SNAP Documentation

MultiScape Commands
Parameter Description
OTHER SIMULATION TOOLS
SNAPSetAcousticSpace
The SNAPSetAcousticSpace command assigns a number and
loads the filters for an acoustic space into MultiScape.
in long lSpace set acoustic space
in const char* szPath directory path of the room’s data files
SNAPMultiSetRoom
The SNAPMultiSetRoom command associates a room number
with an acoustic space.
in long lSpace The identifier of the acoustic space
in long lRoom The room number to associate with the acoustic space
SNAPMultiSetRoomSegment
The SNAPMultiSetRoomSegment sets the geometry for a room.
The first parameter is the room number followed by the X,Y,Z
of the bottom left corner and the X,Y,Z of the top right corner
of the room segment. A room can be made up of many room
segments.
in long lRoom The room number
in float fmin_xu Float representing the minimum X coordinate of the a room
segment (bottom left).
in float fmin_yu Float representing the minimum Y coordinate of the a room
segment (bottom left).
in float fmin_zu Float representing the minimum Z coordinate of the a room
segment (bottom left).
in float fmax_xu Float representing the maximum X coordinate of the a room
segment (top right).
in float fmax_yu Float representing the maximum X coordinate of the a room
segment (top right).
in float fmax_zu Float representing the maximum X coordinate of the a room
segment (top right).
HURON TECHNICAL MANUAL PAGE 165