Huron & SNAP Documentation

Manipulating Tracks
↓ To add a track
↓ To change a track’s position in
the scene
↓ To delete a track
THE SIMULATION TOOLS
allowed, with any text on a line following a semicolon (;) being
ignored.
• Select Add Track from the Track menu
— or —
Double click on an empty part of the scene.
The Track Properties dialog will appear asking you for
information about the new track.
Figure 46 – Track Properties dialog
The first free channel number will appear as the default for the
new track. Select Interpolation if you wish this track’s output
to be a linear interpolation between the nearest two events
within a trajectory. The Solo and Mute functions allow you to
silence all other tracks, or just this one during playback. The
Arm feature specifies whether to add events to this track during
record. If Arm is unchecked then events on the track’s channel
will be ignored when recording.
1. Select Move Track from the Track menu.
2. Identify the desired track, either by numerical position
within the scene, or by name.
3. Select the new desired position and click OK.
1. Select Delete from the Track menu.
2. Identify the desired track, either by numerical position
within the scene, or by name and click OK.
HURON TECHNICAL MANUAL PAGE 128