Huron & SNAP Documentation

Figure 42 — HeadScape’s add ERTF’s dialogue box
Adding, Editing and Deleting Early Impulses
↓ To add a series of front impulses
to the list
↓ To edit (swap) a series of front
impulse filters in the list
↓ To delete a series of front
impulses from the list
THE SIMULATION TOOLS
2. From the Select *.SIM file window, Choose the left-hand
impulse response file for the room required.
3. Click OK to load the left Impulse response filter.
4. Click Browse … next to the Right edit box, and repeat the
procedure above to load the right side impulse.
The switching of the early part of the impulse response in a
HeadScape simulation provides the means of clearly and
accurately externalising sound sources. A series of filters is
loaded into the HeadScape tool via a descriptive HeadTurn file
(*.htr) — for more details on the HeadTurn file see the file
description below.
1. Click Add.
2. Select a the relevant *.htr file.
3. Click OK.
1. Select the *.htr file you wish to swap for another.
2. Click Edit.
3. Click OK, the selected *.htr file will be replaced.
1. Select the *.htr file you wish to remove.
HURON TECHNICAL MANUAL PAGE 119