SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal SFCD: Federal Commander Digital System - Federal Signal
Recording Control Federal Commander Digital System The Record Control button displays the Windows® Record Control panel. Use this panel to adjust the Live PA input level. VU Peek Meter Adjust the Microphone level so the VU Peek Meter sweeps full scale on voice peeks. The VU Peek meter is color coded as follows: Green: Level below peek Yellow: One or more samples at or above peek. Red: More than 5% of samples at or above peek. The optimum level is obtained when the color is alternating between green and yellow with normal voice. Reduce the level if red is easily achieved, however occasionally hitting red is satisfactory. Program Mode Program Mode allows the configuration of hotkeys. When program mode is enabled, clicking on a hotkey will bring up the Program Hotkey screen for the respective key. To enable program mode, check the Program Mode check box located on the Activation Hotkey screen. 80 Activate
The following warning will be displayed: Federal Commander Digital System Click OK to continue or Cancel to abort. The Level2 Password prompt will appear if enabled. To exit program mode, uncheck the program mode check box. If no activity is detected for 15 seconds, program mode will automatically terminate. While in program mode, the background will change from black to green and “Program Mode” will appear under the siren graphic. 81 Activate
- Page 29 and 30: MAPPING.DAT: Federal Commander Digi
- Page 31 and 32: Federal Commander Digital System Co
- Page 33 and 34: Federal Commander Digital System 3.
- Page 35 and 36: Federal Commander Digital System 1.
- Page 37 and 38: Federal Commander Digital System Cl
- Page 39 and 40: Federal Commander Digital System 7.
- Page 41 and 42: Federal Commander Digital System va
- Page 43 and 44: SFCDWARE Main Screen Federal Comman
- Page 45 and 46: Help Federal Commander Digital Syst
- Page 47 and 48: Tools Menu Federal Commander Digita
- Page 49 and 50: System Configuration Federal Comman
- Page 51 and 52: Update User Federal Commander Digit
- Page 53 and 54: Quit Federal Commander Digital Syst
- Page 55 and 56: Message Templates Federal Commander
- Page 57 and 58: Quit Federal Commander Digital Syst
- Page 59 and 60: acknowledged. Federal Commander Dig
- Page 61 and 62: Reports Federal Commander Digital S
- Page 63 and 64: Export Federal Commander Digital Sy
- Page 65 and 66: AVAILABLE RADIO BUTTON SELECTIONS D
- Page 67 and 68: Print Report Federal Commander Digi
- Page 69 and 70: Federal Commander Digital System di
- Page 71 and 72: Legend Federal Commander Digital Sy
- Page 73 and 74: Federal Commander Digital System To
- Page 75 and 76: Federal Commander Digital System To
- Page 77 and 78: Federal Commander Digital System Pr
- Page 79: Federal Commander Digital System Hi
- Page 83 and 84: Button Number Federal Commander Dig
- Page 85 and 86: PA Wave File PA SmartMsg Federal Co
- Page 87 and 88: Templates Federal Commander Digital
- Page 89 and 90: Length: Display Tab Federal Command
- Page 91 and 92: Send Federal Commander Digital Syst
- Page 93 and 94: Federal Commander Digital System
- Page 95 and 96: Federal Commander Digital System Th
- Page 97 and 98: Mode Federal Commander Digital Syst
- Page 99 and 100: System Setup Federal Commander Digi
- Page 101 and 102: Federal Commander Digital System To
- Page 103 and 104: Federal Commander Digital System Th
- Page 105 and 106: Federal Commander Digital System in
- Page 107 and 108: Federal Commander Digital System ad
- Page 109 and 110: Federal Commander Digital System ot
- Page 111 and 112: Federal Commander Digital System Th
- Page 113 and 114: Federal Commander Digital System ac
- Page 115 and 116: Voice Modem Comm Port Federal Comma
- Page 117 and 118: Save Federal Commander Digital Syst
- Page 119 and 120: Federal Commander Digital System
- Page 121 and 122: Federal Commander Digital System Th
- Page 123 and 124: Introduction Federal Commander Digi
- Page 125 and 126: Federal Commander Digital System Nu
- Page 127 and 128: IO Board Federal Commander Digital
- Page 129 and 130: RTU Federal Commander Digital Syste
Recording Control<br />
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
The Record Control button displays the Windows® Record Control panel. Use this panel to adjust<br />
the Live PA input level.<br />
VU Peek Meter<br />
Adjust the Microphone level so the VU Peek Meter sweeps full scale on voice peeks. The VU<br />
Peek meter is color coded as follows:<br />
Green: Level below peek<br />
Yellow: One or more samples at or above peek.<br />
Red: More than 5% of samples at or above peek.<br />
The optimum level is obtained when the color is alternating between green and yellow with<br />
normal voice. Reduce the level if red is easily achieved, however occasionally hitting red is<br />
satisfactory.<br />
Program Mode<br />
Program Mode allows the configuration of hotkeys. When program mode is enabled, clicking on<br />
a hotkey will bring up the Program Hotkey screen for the respective key. To enable program<br />
mode, check the Program Mode check box located on the Activation Hotkey screen.<br />
80<br />
Activate