SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
Enter the desired site number and click Add to place site. To cancel without placing site click<br />
Cancel.<br />
Delete Site<br />
Click Delete Site to delete site(s) from the map. You will be prompted for the Level2 password (if<br />
applicable). The following dialog box will be displayed:<br />
To delete a single site, enter the site number and click the Single Site push button. To delete all<br />
sites, click the All Sites push button (a warning message will appear). To quit without deleting<br />
any site, click the Quit button.<br />
Reset Status<br />
This selection will set all siren dots to blue; thereby resetting the color-coded status as a result of<br />
the last poll response. See map description below for color-coded status details. Typically the<br />
Reset Map function would be used just prior performing a Poll All command. This ensures that<br />
the color status displayed is a result of the current poll, and not a previous poll.<br />
Poll All<br />
Initiates a poll sequence of all RTUs in the system. Note: The operator must always be aware<br />
that site conditions shown on any <strong>SFCD</strong>WARE <strong>System</strong> screen, including the map, are not real<br />
time, but represent conditions at the time of the last polling. Large systems may take several<br />
minutes to complete a polling sequence.<br />
Activate<br />
This selection will display the <strong>SFCD</strong>WARE Activation Hotkeys window. Refer to the Activate<br />
section of this manual for details regarding this screen.<br />
70<br />
Map