SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal SFCD: Federal Commander Digital System - Federal Signal
AVAILABLE RADIO BUTTON SELECTIONS Display Report Federal Commander Digital System After all report options have been entered, select this radio button to display the report on the screen. Print Report After all report options have been entered, select this radio button to begin printing the report. 62 Reports
Export Federal Commander Digital System This function will create a tab delimited text file for use with database programs such as Microsoft Excel. A Windows Browse dialog will pop up for path and file name selection. Quit Select this radio button to quit the Alarm Report Selections screen. Report Format The report is formatted to provide the Alarm entry No., Time & Date of Alarm, RTU address( 000 = system address, 900-909 = the base station address, ALL = All Call address, and Z01-Z16 = the zone address), and the Alarm Description. From Entry The format of this data entry field is seven digits. To enter number 1, enter "0000001". Leading zeros are required. To change From Entry, highlight the current number, and then enter a new number. Only messages that have a number that is equal to or greater than From Alarm will be included on this report. To Entry The format of this data entry field is seven digits. To enter number 6387, enter "0006387". Leading zeros are required. To change To Entry, highlight the current number, and then enter a new number. Only messages that have a number that is equal to or less than To Entry will be included on this report. From Date The format of this data entry field is MM/DD/YY. To enter the date of January 10th 2002, enter "01/10/02". Leading zeros and slashes are required. To change From Date, highlight the current date, and then enter a new date. Only alarm messages that have a date that is on or after the From Date will be included on this report. To Date The format of this data entry field is MM/DD/YY. To enter the date of December 31st 2002, enter "12/31/02". Leading zeros and slashes are required. To change the To Date, highlight the current date, and then enter a new date. Only alarm messages that have a date that is on or before the To Date will be included on this report. From RTU The format of this data entry field is three digits. To enter an RTU number of one, enter "001". Leading zeros are required. To change From RTU, highlight the current RTU number, and then enter a new number. Only alarm messages that have an RTU number that is equal to or greater than From RTU will be included on this report. 63 Reports
- Page 11 and 12: Federal Commander Digital System Se
- Page 13 and 14: Federal Commander Digital System Li
- Page 15 and 16: Federal Commander Digital System NO
- Page 17 and 18: Federal Commander Digital System In
- Page 19 and 20: Federal Commander Digital System CC
- Page 21 and 22: MODEM-MSK Description Federal Comma
- Page 23 and 24: Federal Commander Digital System De
- Page 25 and 26: Federal Commander Digital System Wo
- Page 27 and 28: Codespear Federal Commander Digital
- Page 29 and 30: MAPPING.DAT: Federal Commander Digi
- Page 31 and 32: Federal Commander Digital System Co
- Page 33 and 34: Federal Commander Digital System 3.
- Page 35 and 36: Federal Commander Digital System 1.
- Page 37 and 38: Federal Commander Digital System Cl
- Page 39 and 40: Federal Commander Digital System 7.
- Page 41 and 42: Federal Commander Digital System va
- Page 43 and 44: SFCDWARE Main Screen Federal Comman
- Page 45 and 46: Help Federal Commander Digital Syst
- Page 47 and 48: Tools Menu Federal Commander Digita
- Page 49 and 50: System Configuration Federal Comman
- Page 51 and 52: Update User Federal Commander Digit
- Page 53 and 54: Quit Federal Commander Digital Syst
- Page 55 and 56: Message Templates Federal Commander
- Page 57 and 58: Quit Federal Commander Digital Syst
- Page 59 and 60: acknowledged. Federal Commander Dig
- Page 61: Reports Federal Commander Digital S
- Page 65 and 66: AVAILABLE RADIO BUTTON SELECTIONS D
- Page 67 and 68: Print Report Federal Commander Digi
- Page 69 and 70: Federal Commander Digital System di
- Page 71 and 72: Legend Federal Commander Digital Sy
- Page 73 and 74: Federal Commander Digital System To
- Page 75 and 76: Federal Commander Digital System To
- Page 77 and 78: Federal Commander Digital System Pr
- Page 79 and 80: Federal Commander Digital System Hi
- Page 81 and 82: The following warning will be displ
- Page 83 and 84: Button Number Federal Commander Dig
- Page 85 and 86: PA Wave File PA SmartMsg Federal Co
- Page 87 and 88: Templates Federal Commander Digital
- Page 89 and 90: Length: Display Tab Federal Command
- Page 91 and 92: Send Federal Commander Digital Syst
- Page 93 and 94: Federal Commander Digital System
- Page 95 and 96: Federal Commander Digital System Th
- Page 97 and 98: Mode Federal Commander Digital Syst
- Page 99 and 100: System Setup Federal Commander Digi
- Page 101 and 102: Federal Commander Digital System To
- Page 103 and 104: Federal Commander Digital System Th
- Page 105 and 106: Federal Commander Digital System in
- Page 107 and 108: Federal Commander Digital System ad
- Page 109 and 110: Federal Commander Digital System ot
- Page 111 and 112: Federal Commander Digital System Th
Export<br />
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
This function will create a tab delimited text file for use with database programs such as<br />
Microsoft Excel. A Windows Browse dialog will pop up for path and file name selection.<br />
Quit<br />
Select this radio button to quit the Alarm Report Selections screen.<br />
Report Format<br />
The report is formatted to provide the Alarm entry No., Time & Date of Alarm, RTU address( 000<br />
= system address, 900-909 = the base station address, ALL = All Call address, and Z01-Z16 =<br />
the zone address), and the Alarm Description.<br />
From Entry<br />
The format of this data entry field is seven digits. To enter number 1, enter "0000001". Leading<br />
zeros are required. To change From Entry, highlight the current number, and then enter a new<br />
number. Only messages that have a number that is equal to or greater than From Alarm will be<br />
included on this report.<br />
To Entry<br />
The format of this data entry field is seven digits. To enter number 6387, enter "0006387".<br />
Leading zeros are required. To change To Entry, highlight the current number, and then enter a<br />
new number. Only messages that have a number that is equal to or less than To Entry will be<br />
included on this report.<br />
From Date<br />
The format of this data entry field is MM/DD/YY. To enter the date of January 10th 2002, enter<br />
"01/10/02". Leading zeros and slashes are required. To change From Date, highlight the current<br />
date, and then enter a new date.<br />
Only alarm messages that have a date that is on or after the From Date will be included on this<br />
report.<br />
To Date<br />
The format of this data entry field is MM/DD/YY. To enter the date of December 31st 2002, enter<br />
"12/31/02". Leading zeros and slashes are required. To change the To Date, highlight the current<br />
date, and then enter a new date.<br />
Only alarm messages that have a date that is on or before the To Date will be included on this<br />
report.<br />
From RTU<br />
The format of this data entry field is three digits. To enter an RTU number of one, enter "001".<br />
Leading zeros are required. To change From RTU, highlight the current RTU number, and then<br />
enter a new number.<br />
Only alarm messages that have an RTU number that is equal to or greater than From RTU will be<br />
included on this report.<br />
63<br />
Reports